Description
- Two-part silicone elastomer dispersed in xylene
- Two medium viscosity parts blend easily in a convenient 1:1 ratio (Part A:B)
Applications
- For dip casting and heat-curing of thin elastomeric films
Product Details
| Property | Average Result |
|---|---|
| Viscosity | 3,275 cP (3,275 mPa*s) |
| Non Volatile Content | 20 % |
| Appearance | Translucent |
| Attribute | |
| Cure | 30 minutes / RTV 45 minutes / 75 °C 135 minutes / 150 °C |
| Cure System | Platinum |
| Durometer | 45 Type A |
| Elongation | 1,000 % |
| Mix Ratio | 1:1 |
| Stress at Strain | 140 psi / 100 % (0.97 MPa / 100 %) |
| Tear | 300 ppi (52.91 kN/m) |
| Tensile | 1,650 psi (11.38 MPa) |
| Comment | Cure: 30 M / 25 C : 45 M / 75 C : 135 M / 150 C, 20% Solids |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.