Description
- One-part, translucent, non-slumping silicone adhesive
- Supplied ready to use in Semco® cartridges
Applications
- Bonds aggressively to most surfaces including: glass, ceramics, most metals, natural and synthetic fibers, wood, painted surfaces, many plastics and other silicone rubbers
- For applications requiring a operating temperature range of -65 to 240°C (-85 to 465°F)
Product Details
| Property | Average Result |
|---|---|
| Cure System | Acetoxy |
| Lap Shear | 625 psi (4.31 MPa) |
| Durometer | 30 Type A |
| Appearance | Translucent |
| Cure | 72 hours / RTV |
| Elongation | 350 % |
| Flow Rate | 1.5 in (38.1 mm) |
| Mix Ratio | 1 PART |
| Non Volatile Content | 100 % |
| Specific Gravity | 1.09 |
| Tack Free Time | 7 minutes |
| Tear | 40 ppi (7.05 kN/m) |
| Tensile | 700 psi (4.83 MPa) |
| Comment | Non-slump. General all purpose adhesive for a variety of substrates. 625 psi (4.3 MPa), primed (SP-120) lap shear. |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.