- Pre-catalyzed, high consistency elastomer
- Medium durometer
- Strained through a 400-mesh screen (minimum)
- For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding.
|Durometer||50 Type A|
|Tensile||1,650 psi (11.38 MPa)|
|Tear||100 ppi (17.64 kN/m)|
|Cure||5 minutes / 116 °C|
|Mix Ratio||1 PART|
|Post Cure||2 hours / 249 °C|
|Stress at Strain||400 psi / 200 % (2.76 MPa / 200 %)|
|Comment||Non-Vinyl Specific Peroxide Precatalyzed|
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.