Premium Care Line

MED2-4220

FAST CURE LOW VISCOSITY SILICONE ELASTOMER

Description

  • A two-part, translucent silicone elastomer system that cures at room temperature
  • Cures with heat via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For use in potting, encapsulating, coating, and injection or transfer molding applications
  • For applications requiring very rapid cure elastomer

Product Details

Property Average Result
Durometer 20 Type A
Viscosity 19,500 cP (19,500 mPa*s)
Work Time 3 minutes
Tensile 585 psi (4.03 MPa)
Appearance Translucent
Cure 15 minutes / 150 °C
Cure System Platinum
Elongation 500 %
Mix Ratio 1:1
Specific Gravity 1.07
Stress at Strain 100 psi / 200 % (0.69 MPa / 200 %)
Comment Low Viscosity, Rapid RTV Cure

The Strongest Silicone Elastomer Ever Developed

Dr. Jim Lambert, NuSil® Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.

Read more

Save to favorites

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.