Premium Care Line

MED-4905

LIQUID SILICONE RUBBER

Description

  • Two-part, translucent silicone system used with injection molding equipment
  • Cures with heat via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For the injection molding of parts requiring a material with a low durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings
  • and other precision parts
  • Suitable for over-molding applications
  • Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones

Product Details

Property Average Result
Durometer 7 Type A
Tensile 350 psi (2.41 MPa)
Elongation 1000 %
Tear 70 ppi (12.35 kN/m)
Appearance Translucent
Cure 5 minutes / 150 °C
Cure Rate Scorch 0.65 minutes
Cure Rate T90 1.9 minutes
Cure System Platinum
Extrusion Rate 65 g/minute
Mix Ratio 1:1
Stress at Strain 40 psi / 200 % (0.28 MPa / 200 %)
Work Time 55 hours
Comment Injection Molding Elastomer

The Strongest Silicone Elastomer Ever Developed

Dr. Jim Lambert, NuSil® Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.

Read more

Save to favorites

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.