Description
- A very soft two-part, low viscosity, silicone elastomer
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
Applications
- For use in potting, encapsulating, coating, and injection or transfer molding applications
NuSil Technology’s MED-4086 shall not be considered for use in human implantation for a period of greater than 29 days.
Product Details
Property | Average Result |
---|---|
Durometer | 55 Type 000 |
Viscosity | 6,450 cP (6,450 mPa*s) |
Work Time | 18 hours |
Tensile | 40 psi (0.28 MPa) |
Cure | 45 minutes / 150 °C |
Cure System | Platinum |
Elongation | 475 % |
Mix Ratio | 1:1 |
Stress at Strain | 8 psi / 200 % (0.06 MPa / 200 %) |
Comment | Ultra Soft Elastomer |
The Strongest Silicone Elastomer Ever Developed
Dr. Jim Lambert, NuSil® Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.