Premium Care Line

MED-4011

LOW VISCOSITY SILICONE ELASTOMER

Description

  • Two-part, translucent gray, pourable silicone system
  • Cures with heat via addition-cure chemistry
  • 10:1 Mix Ratio (Part A: Part B)

Applications

  • For use in potting, encapsulating, coating, and injection or transfer molding applications
NuSil™ MED-4011 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Durometer 27 Type A
Viscosity 100,000 cP
Tensile 670 psi (4.62 MPa)
Appearance Translucent
Cure 3 minutes / 150 °C
Cure System Platinum
Elongation 530 %
Mix Ratio 10:1
Post Cure 1 hours / 150 °C
Specific Gravity 1.09
Comment Flowable

The Strongest Silicone Elastomer Ever Developed

Dr. Jim Lambert, NuSil® Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.

Read more

Save to favorites

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.