Premium Care Line

MED-2014

SILICONE DISPERSION

Description

  • Fully compounded, platinum-catalyzed, dimethyl-methylvinyl siloxane elastomers dispersed in xylene
  • Excellent physical properties
  • Usable life can be extended with refrigeration

Applications

  • Suitable for dip casting and heat-curing of thin elastomeric films
  • For use as an adhesive for bonding and sealing silicone together
  • Low viscosity makes dispersions ideal for use as sprayable coatings

Product Details

Property Average Result
Cure System Platinum
Viscosity 1,800 cP (1,800 MPa*s)
Non Volatile Content 35 %
Appearance Translucent
Cure 60 minutes / 50 °C 60 minutes / 150 °C 3 minutes / RTV
Elongation 900 %
Mix Ratio 1 PART
Solvent Xylene
Specific Gravity
Stress At Strain
Tear 160 ppi (28.22 kN/m)
Tensile 1,700 psi (11.72 MPa)
Comment One Part, Requires heat to cure

The Strongest Silicone Elastomer Ever Developed

Dr. Jim Lambert, NuSil® Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.

Read more

Save to favorites

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.