Premium Care Line

MED-1037

RTV SILICONE ADHESIVE

Description

  • One part, low slump, solvent-free translucent silicone
  • Cures at room temperature upon exposure to atmospheric moisture

Applications

  • Well suited for use as an adhesive for bonding and sealing silicone materials
  • For applications requiring the bonding of silicone to metals, urethanes and various other substrates
NuSil Technology’s MED-1037 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Cure Type RTV
Mix Ratio 1 PART
Rheology Thixotropic / non-slump
Appearance Translucent
Cure 72 hours / RTV
Cure System Acetoxy
Durometer 30 Type A
Elongation 565 %
Extrusion Rate 2.8 g/minute
Flow Rate 0.2 in (5.08 mm)
Specific Gravity 1.07
Stress at Strain 170 psi / 200 % (1.17 MPa / 200 %)
Substrate Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate
Tack Free Time 9 minutes
Tensile 730 psi (5.03 MPa)
Comment Low-slump, solvent-free translucent silicone

The Strongest Silicone Elastomer Ever Developed

Dr. Jim Lambert, NuSil® Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.

Read more

Save to favorites

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.