Description
- One part, solvent-free, non-slumping translucent silicone
- Cures at room temperature upon exposure to atmospheric moisture
Applications
- Well suited for use as an adhesive for bonding and sealing silicone materials
- For applications requiring the bonding of silicone to metals, urethanes and various other substrates
NuSil Technology’s MED-1031 shall not be considered for use in human implantation for a period of greater than 29 days.
Product Details
| Property | Average Result |
|---|---|
| Cure Type | RTV |
| Mix Ratio | 1 PART |
| Rheology | Thixotropic / non-slump |
| Appearance | Translucent |
| Cure | 7 days / RTV |
| Cure System | Oxime |
| Durometer | 35 Type A |
| Elongation | 310 % |
| Extrusion Rate | 70 g/minute |
| Specific Gravity | 1.1 |
| Stress at Strain | 415 psi / 200 % (2.86 MPa / 200 %) |
| Substrate | Primerless: Glass / Polyurethane / Aluminum / Silicone / Titanium |
| Tack Free Time | 22 minutes |
| Tear | 40 ppi (7.05 kN/m) |
| Tensile | 840 psi (5.79 MPa) |
| Comment | Non-acidic leaving group |
The Strongest Silicone Elastomer Ever Developed
Dr. Jim Lambert, NuSil® Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.