Description
- Two-part, optically clear, solvent free, low viscosity silicone
- Cures at room temperature or rapidly with heat
- Offers good physical and electrical stability across a broad range of temperatures
- 1:1 Mix Ratio (Part A:B)
Applications
- To provide protection of electronic components and assemblies against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards by potting or encapsulating
- For photonics applications such as HBLEDs, photo detectors, lasers, discrete optics and flat panel displays that require a 1.41 refractive index
Product Details
Property | Average Result |
---|---|
Cure System | Platinum |
Viscosity | 1,100 cP (1,100 mPa*s) |
Durometer | 30 Type A |
Tensile | 120 psi (0.83 MPa) |
Elongation | 100 % |
Appearance | Clear |
Cte | |
Cure | 30 minutes / 150 °C |
Dielectric Strength | 600 volts/mil (23.4 kV/mm) |
Ionic Content Cl | <5 ppm |
Ionic Content K | <5 ppm |
Ionic Content Na | <10 ppm |
Mix Ratio | 1:1 |
Refractive Index | 1.41 |
Volatile Content | 0.7 % |
Volume Resistivity | 100,000,000,000,000 ohmcm |
Work Time | 5.5 hours |
Comment | General use RTV clear adhesive. |

Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
Save to favorites
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.