Description
- Two-part, optically clear, silicone system that pours
- Cures at room temperature or rapidly with heat
- Offers good physical properties and a broad operating temperature range
- 1:1 Mix Ratio (Part A:B)
Applications
- For bonding, casting or injection molding of high performance optical components
- For applications requiring index matching at 1.46
Product Details
Property | Average Result |
---|---|
Cure System | Platinum |
Viscosity | 37,500 cP (37,500 mPa*s) |
Durometer | 30 Type A |
Tensile | 675 psi (4.66 MPa) |
Elongation | 275 % |
Appearance | Translucent |
Cte | |
Cure | 30 minutes / 150 °C |
Dielectric Strength | 510 volts/mil (19.89 kV/mm) |
Lap Shear | 510 psi (3.52 MPa) |
Mix Ratio | 1:1 |
Operating Temperature | -65 °C / 240 °C |
Refractive Index | 1.46 |
Specific Gravity | 1.14 |
Tear | 40 ppi (7.05 kN/m) |
Volatile Content | 0.20 % |
Work Time | 2 hours |
Comment | 1.46 Refractive Index at 589nm and contains fumed silica. |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.