Description
- A translucent, one-part, RTV silicone
- Based on a fluorosilicone polymer
Applications
- For sealing and bonding applications requiring solvent and/or fuel resistance
- Bonds aggressively to most surfaces
- For protecting or bonding hardware components exposed to gasoline or aviation fuels
- For applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F)
Product Details
| Property | Average Result |
|---|---|
| Cure System | Acetoxy |
| Extrusion Rate | 250 g/minute |
| Lap Shear | 210 psi (1.45 MPa) |
| Durometer | 30 Type A |
| Appearance | Translucent |
| Attribute | |
| Cure | 72 hours / RTV |
| Elongation | 400 % |
| Mix Ratio | 1 PART |
| Non Volatile Content | 100 % |
| Specific Gravity | 1.29 |
| Tack Free Time | 8 minutes |
| Tear | 40 ppi (7.05 kN/m) |
| Tensile | 450 psi (3.1 MPa) |
| Comment | High Temperature, Fuel Resistant |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.