Description
- A white, one-part, fluorosilicone adhesive
- 100 mol% fluorosilicone
- Cures at room temperature
Applications
- For sealing and bonding applications requiring solvent and/or fuel resistance
- Bonds aggressively to most surfaces
- Ideal for protection or bonding of components that are exposed to gasoline or aviation fuels
Product Details
Property | Average Result |
---|---|
Cure System | Acetoxy |
Extrusion Rate | 180 g/minute |
Lap Shear | 350 psi (2.41 MPa) |
Durometer | 33 Type A |
Appearance | White |
Cure | 72 hours / RTV |
Elongation | 440 % |
Mix Ratio | 1 PART |
Specific Gravity | 1.4 |
Tack Free Time | 25 minutes |
Tear | 55 ppi (9.7 kN/m) |
Tensile | 900 psi (6.21 MPa) |
Comment | 100%M Fluoro general all purpose adhesive for environments exposed to hydrocarbon fuels or solvents. |
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.