Description
- One-Part, white, non-slumping silicone RTV
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- As a sealing, caulking, adhesive or potting material in electrical and space applications to provide protection of sensitive circuits including in connectors, switches and electrical components
- For sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material
- For applications requiring a broader operating temperature range
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Cure System | Oxime |
| Rheology | Flowable / Self Leveling |
| Durometer | 40 Type A |
| Appearance | White |
| Cure | 7 days / RTV |
| Cure Type | RTV |
| Dielectric Strength | 1,180 volts/mil (46.02 kV/mm) |
| Elongation | 300 % |
| Extrusion Rate | 20 g/minute |
| Flow Rate | 0.7 in (17.78 mm) |
| Mix Ratio | 1 PART |
| Specific Gravity | 1.13 |
| Tack Free Time | 20 minutes |
| Tear | 60 ppi (10.58 kN/m) |
| Tensile | 700 psi (4.83 MPa) |
High-precision laser performance with ultra-low outgassing silicone
Learn how NuSil collaborated with a leading manufacturer of lasers to improve longevity and stability of space-based lasers.
Save to favorites
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.