CV15-2500

CONTROLLED VOLATILITY SILICONE ELASTOMER

Description

  • Two-part, optically clear silicone system
  • Low viscosity
  • Convenient 1:1 mix ratio (Part A:B)

Applications

  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
  • As an embedding or potting compound for electronic assemblies and components to provide protection from extremes in humidity, radiation, thermal stress and mechanical stress
  • Suitable as an adhesive in applications such as solar cell arrays where clarity and low volatility are important
  • For applications requiring a low viscosity for superior flow

Product Details

Property Average Result
Cure System Platinum
Viscosity 3,225 cP (3,225 MPa*s)
Lap Shear 300 psi (2.07 MPa)
Durometer 50 Type A
Appearance Clear
Cte 400 ppm/°C
Cure 15 minutes / 150 °C
Elongation 70 %
Mix Ratio 1:1
Refractive Index 1.40
Specific Gravity 1.02
Tack Free Time 6 hours
Tensile 850 psi (5.86 MPa)
Work Time 3 hours
Comment *4 )Primed Lap Shear 225 psi (1.6 MPa), Optically Clear

What Is Space Grade?

Discover what it takes to make silicones worthy of the distinction "Space Grade" and the rigorous testing that these materials undergo.

Read more

Save to favorites

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.