Description
- Two-part, red, low specific gravity, RTV silicone
- 1:1 Mix Ratio (Part A: Part B)
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
- Use a bonding, sealing, or potting material in electronic and space applications
- Provides radiation resistance, low thermal conductivity, oxidation stability, thermal stability and good ablative characteristics
- Especially useful to bond solar cells to solar array panels
- For applications requiring a broader operating temperature range
Product Details
Property | Average Result |
---|---|
Cure System | Platinum |
Viscosity | 102,500 cP (102,500 mPa*s) |
Lap Shear | 175 psi (1.21 MPa) |
Durometer | 40 Type A |
Appearance | Red |
Cte | |
Cure | 30 minutes / 150 °C |
Dielectric Strength | 860 volts/mil (33.54 kV/mm) |
Elongation | 170 % |
Mix Ratio | 1:1 |
Specific Gravity | 0.76 |
Tack Free Time | 7 hours |
Tensile | 235 psi (1.62 MPa) |
Work Time | 3 hours |
Comment | Fast Cure, Low Density*,4 )Primed Lap Shear 175 psi (1.2 MPa) |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.