Description
- Two-part, tan-colored electrically conductive silicone
- 20:1 Mix Ratio (Part A:B)
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
- Use for RFI and EMI shielding in electrical and space applications
- Well suited for form-in-place conductive gaskets
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
Property | Average Result |
---|---|
Volume Resistivity | 0.01 ohmcm |
Viscosity | 224,500 cP (224,500 mPa*s) |
Cure System | Platinum |
Durometer | 85 Type A |
Tensile | 525 psi (3.62 MPa) |
Appearance | Tan |
Cte | |
Cure | 30 minutes / 150 °C |
Elongation | 86 % |
Mix Ratio | 20:1 |
Specific Gravity | 3.39 |
Thermal Conductivity | 1.2 W/(mK) |
Work Time | 2.75 hours |
Comment | 0.005 ohmcm, *22) 1.2 W/mK |

High-precision laser performance with ultra-low outgassing silicone
Learn how NuSil collaborated with a leading manufacturer of lasers to improve longevity and stability of space-based lasers.
Save to favorites
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.