Description
- Two-part, translucent fluorosilicone elastomer used with liquid injection molding equipment
- 1:1 Mix Ratio (Part A:B)
- Cures at room temperature or rapidly with heat
- 50 mole % fluorosilicone
Applications
- For applications requiring a medium hardness silicone and solvent resistance
- Some typical applications include O-rings, gaskets, seals, and precision molded parts
- Excellent for molding high quality parts at rapid rates
- For applications requiring an operating temperature range of -65 to 240°C (-85 to 465°F)
Product Details
Property | Average Result |
---|---|
Cure System | Platinum |
Durometer | 30 Type A |
Tensile | 700 psi (4.83 MPa) |
Elongation | 360 % |
Appearance | Translucent |
Cure | 30 minutes / 150 °C |
Extrusion Rate | 120 g/minute |
Mix Ratio | 1:1 |
Operating Temperature | -65 °C / 240 °C |
Specific Gravity | 1.26 |
Work Time | 12 hours |
Comment | LCE Fluoro Elastomer;Recommend for short term fuel or solvent exposure. |

Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
Save to favorites
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.