2979 Results for: "UPCHURCH SCIENTIFIC"

Supplier: UPCHURCH SCIENTIFIC

These filters are ideal for higher pressure applications and to help prevent particulate contamination.

Supplier: UPCHURCH SCIENTIFIC

PP or ETFE. Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec® peristaltic pumps. Due to the low melting point of PP, these adapters are not autoclavable, however, they can be sterilised via gamma radiation. The ETFE connectors have superiour solvent resistance and a higher temperature rating (80 °C).

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-309, plug for 1/4-28 flat bottom ports, standard knurl, Delrin®*, Black

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-200x, replacement flangeless ferrule for 1/16" OD tubing, ETFE blue, 1/4-28 flat-bottom port, 2000 psi, ETFE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® Super Flangeless™, P-259x, ferrule, ETFE yellow/stainless steel, 1/4-28 or M6 flat bottom port, for 1/16" OD tubing, 1350 psi

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-300x, replacement flangeless ferrule, ETFE yellow, 1/4-28 flat bottom port, for 1/8" OD tubing, 500 psi, ETFE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® quick connect Luer adapters provide the opportunity to adapt either a female Luer or male Luer connection to a threaded connection. Conform to ISO requirements for medical Luer taper configuration and performance (45 psi/3,1 bar).

Supplier: UPCHURCH SCIENTIFIC

PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.

Supplier: UPCHURCH SCIENTIFIC

PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, A-103 stainless steel frit, 0,5 µm

Supplier: UPCHURCH SCIENTIFIC

These standard inline check valves are made from gold plated stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Designed to cut polymer tubing ¹/₁₆" and ¹/₈" O.D.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, C-128-31 frit, Porosity: 0,5 µm, Thickness: 0,71 mm, Frit Ø ext.: 1,0 mm, Frit volume: 0,1 µl, Frit material: Stainless steel, Ring ext. Ø: 3,17 mm, Ring material: PEEK

Supplier: UPCHURCH SCIENTIFIC

Note: Do not use metal fittings in plastic ports, as this can damage the port.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, VHP torque wrench, Tightening torque: 1,13 N-m, Use with head style: 1/4" hex

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, XP-143x, flangeless fittings includes nut, PEEK natural and washer, ETFE orange, 5/16-24 flat bottom port, 500 psi, for 3 mm OD tubing

Supplier: UPCHURCH SCIENTIFIC

Stainless steel, PEEK or UHMWPE

Supplier: UPCHURCH SCIENTIFIC

Use this tubing expanding awl when working with barbed fittings. Sometimes the tubing can be too tight to fit over the barb properly. This awl can also be used with semi-rigid tubing, for those rare applications where this tubing needs to be paired with a barbed fitting. By expanding the int.Ø of the tubing, it will make it an easier process to insert the barbed fitting into place.

Supplier: UPCHURCH SCIENTIFIC

PEEK or FEP.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-1087x, replacement washer, stainless steel, M6 flat bottom port, for 1/8" OD tubing, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

These biocompatible PEEK and perfluoroelastomer inline check valves are designed for applications where low flow path volume is critical, such as delivery to lab-on-a-chip, single-cell analysis and micro- or nano-LC post-column derivatisation.

Supplier: UPCHURCH SCIENTIFIC

Back pressure regulator assemblies are designed to create incremental back pressures ranging from 5 to 1000 psi (0,3 to 69 bar). These biocompatible and stainless steel back pressure regulator assemblies are available complete with a replaceable, factory pre-set cartridge (except the 5 and 20 psi (0,3 to 1,4 bar versions).

Supplier: UPCHURCH SCIENTIFIC

PEEKsil capillary.

Supplier: UPCHURCH SCIENTIFIC

These tools made from aluminium or Delrin® can be used to tighten most knurled nuts in hard to reach places. For precise tightening, the extender tools listed with ¼" hex drives are designed to adapt to any torque wrench with a female ¼" socket.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Tefzel® (ETFE), natural.