242 resultater for: "THERMO H + P LABORTECHNIK"

Supplier: THERMO H + P LABORTECHNIK

Stirrer, Multi-position Magnetic Stirrer, For: —

Supplier: THERMO H + P LABORTECHNIK

Magnetic stirrer with pre-selectable power settings, which optimise stirring efficiency for different liquid volumes and minimise heat output.

Supplier: THERMO H + P LABORTECHNIK

Magnetic stirrers which are ideal for routine stirring applications.

Supplier: THERMO H + P LABORTECHNIK

Save space with Thermo Scientific™ Cimarec™ i Telemodul controllers, including Micro, Mini, Compact and Maxi stirrers.

Supplier: THERMO H + P LABORTECHNIK

Single and multi-position stirrers for up to four vessels. Biosystem models and accessory Biomodul 40 B controller are suitable for mixing culture broths, micro-carrier cultures and cell suspensions. Units provide slow and even stirring to protect cultures.

Supplier: THERMO H + P LABORTECHNIK

Magnetic stirrer with external control, units are ideal for stirring large volumes and integration in analytical instruments and systems.

Supplier: THERMO H + P LABORTECHNIK

Perform high-volume applications with the exceptional stirring power of Thermo Scientific™ Cimarec™ Mobil Direct Stirrers. The Mobil 200 and 600 require either the Telemodul 40 M or the Telemodul 80 M control unit.

Supplier: THERMO H + P LABORTECHNIK

Magnetic stirrer with external control, units are ideal for stirring large volumes and integration in analytical instruments and systems. Quick Stop function stops the drive within three seconds, minimizing after runs and risk of vessel breakage.

Supplier: THERMO H + P LABORTECHNIK

Accessories for VARIOKLAV 25 T steam steriliser

Supplier: THERMO H + P LABORTECHNIK

Extension cable, 8-pin, 3 m length, For: Telemodul 40M and 80M

Supplier: THERMO H + P LABORTECHNIK

Multi-position magnetic stirrers for reliable, safe performance with pre-selectable power settings, which optimise stirring efficiency for different liquid volumes and minimise heat output. Stirrers have a large, easy to clean working surface and are ideal for a range of mixing tasks.

Supplier: THERMO H + P LABORTECHNIK

Compact magnetic stirrers with VARIOMAG drive, hermetically sealed in resistant stainless steel housing (except MINI units which are plastic), making these stirrers ideal for use directly in water baths. MINI stirrers are ideal for integration in analytical instruments, cuvette holders or photometers due to their size, however these plastic units are not designed for use directly in baths. There are units with up to 60 stirring positions in this range, and a choice of three external control units. The TELEMODUL 7 has one power setting, the TELEMODUL 20 C has four power settings: 25%; 50%; 75% and 100% and can store three programmes, the TELEMODUL 40 C features ten different power settings from 10 to 100% and a RS232 interface.

Supplier: THERMO H + P LABORTECHNIK

Stainless steel test tube rack, For: 60 test tubes, 20 mm Ø

Supplier: THERMO H + P LABORTECHNIK

Magnetic stirrers which are ideal for use in pilot plants, for thick bottomed stirring vessels, for round flasks and for double walled vessels.

Supplier: THERMO H + P LABORTECHNIK

Komet magnetic stirring bars made from SmCo (Samarium Cobalt) have a PTFE coating which means they can be sterilised. Particularly recommended for high speed stirring, liquids with a high viscosity and stirring in vessels where there is a large distance between stirrer and stirring bar, such as measuring cyliners.

Supplier: THERMO H + P LABORTECHNIK

Perform powerful resonance shaking up to 8500 min⁻¹ with Thermo Scientific™ Teleshake 1536-8 Magnetic Microtiter Plate Shakers, which feature a wear-free magnetic drive. They are remote controlled for integrated shaking applications, and are suited for 1536- and 384-well microtiter plates.

Supplier: THERMO H + P LABORTECHNIK

Disc motor drive stirrers and accessory Telemodul controller, which can stir very large liquid volumes and mix highly viscous media. Stirrers have ultra-flat, space-saving design with housing that is easy-to-clean under running water.

Supplier: THERMO H + P LABORTECHNIK

Ultra flat microplate shakers with VARIOMAG drive which are ideally suited for easy integration into robotic systems. Monoshake is a directly controlled shaker, speed is adjusted by manually turning a button. Teleshake is the same as Monoshake, however it includes a RS232 interface, so the unit can be remotely controlled via control unit and software. Up to 14 units can be controlled directly and independently with only one RS232 interface. When unit is turned off, the shaker plate self centers in zero position.

Supplier: THERMO H + P LABORTECHNIK

Multi-position stirrers with direct control for up to 15 vessels, are ideal for general laboratory and mass screening applications. Units provide smooth stirring even at low speeds and are suitable for use with 15×250 ml beakers or 6×1 litre flasks.

Supplier: THERMO H + P LABORTECHNIK

RS232 module connecting cable

Supplier: THERMO H + P LABORTECHNIK

Compact magnetic stirrers with VARIOMAG drive, hermetically sealed in resistant stainless steel housing (except MINI units which are plastic), making these stirrers ideal for use directly in water baths. MINI stirrers are ideal for integration in analytical instruments, cuvette holders or photometers due to their size, however these plastic units are not designed for use directly in baths. There are units with up to 60 stirring positions in this range, and a choice of three external control units. The TELEMODUL 7 has one power setting, the TELEMODUL 20 C has four power settings: 25%, 50%, 75% and 100% and can store three programmes, the TELEMODUL 40 C features ten different power settings from 10 to 100% and a RS232 interface.

Supplier: THERMO H + P LABORTECHNIK

Power supply, Power supply, 230 V, 20 W, 24 VDC

Supplier: THERMO H + P LABORTECHNIK

Magnetic stirrer with compact, durable design. Unit has a powerful, far-reaching magnetic field, which enables efficient stirring, even when there is some distance between stirrer and stirring bar.

Supplier: THERMO H + P LABORTECHNIK

Simplify operations with the Thermo Scientific™ Cimarec™ i 20C Controller, a user-friendly, menu-driven microprocessor controller that is included with the Micro, Mini, Compact, Maxi and Telesystems stirrers.

Supplier: THERMO H + P LABORTECHNIK

Slow speed stirrers with low heat output and gentle stir acceleration/deceleration mainly designed for demanding cell culture application and thermally sensitive operations.

Supplier: THERMO H + P LABORTECHNIK

VALIDATION DUCT FOR 4 PT100 , FOR 25T

Supplier: THERMO H + P LABORTECHNIK

UK POWER SUPPLY FOR MOBIL DIR. G-VERSION 1 * 1 items

Supplier: THERMO H + P LABORTECHNIK

DIAGRAM DISCS CIRCULAR DISC. 1 * 100 items

Supplier: THERMO H + P LABORTECHNIK

CHAMBER VENTING VALVE 1 * 1 items

Supplier: THERMO H + P LABORTECHNIK

METAL BASKET, PERFORATED IN TOP FOR 135S 1 * 1 items