1132 Results for: "LABCONCO"

Supplier: LABCONCO

Fast-Freeze® flasks for FreeZone® freeze dry systems are designed to be easier to handle, faster to load, and more convenient to use in the laboratory for freeze drying.

Supplier: LABCONCO

These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.

Supplier: LABCONCO

Combine the separate concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 17 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump - the only additional component necessary to begin processing.

Supplier: LABCONCO

Benchtop freeze drying system, type 304 stainless steel with 12 ports, -75 °C. Ideal for the laboratory with occasional lyophilisation requirements, the Dry Ice Benchtop Freeze Dry System provides a simple, economical means of freeze-drying. It is equipped with a center well for dry ice and solvent that serves as a water vapour collector and doubles as a convenient pre-freezing bath. Flasks, serum bottles and ampules may be frozen by dipping and rotating them in the well. Chamber size 248 x222 mm

Supplier: LABCONCO

The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.

Supplier: LABCONCO

Heated product shelf chambers with valves.

Supplier: LABCONCO

Purifier Logic+ Class II Type A2 Biosafety Cabinets are suitable for work with agents that require Biosafety Level 1, 2 or 3 containment.

Supplier: LABCONCO

Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

Supplier: LABCONCO

Produce up to 350 liters per minute of pure nitrogen.

Supplier: LABCONCO

Weathercaps are constructed of strong, corrosion-resistant PVC.

Supplier: LABCONCO

Scroll Vacuum Pumps are low maintenence, corrosion resistent pumps that require no oil.

Supplier: LABCONCO

Oval cupsink, PP, 1,5” NPSM thread, mounts in work surface with cupsink cutout, 76×152 mm

Supplier: LABCONCO

Glassware caps, PTFE, for 600 ml tubes, For: RapidVap® N‚‚

Supplier: LABCONCO

An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

Supplier: LABCONCO

Vacuum controller

Supplier: LABCONCO

Safely transports heavy instruments and bulky equipment. Holds up to 181 kg. Welded frame is constructed of rugged, 18-gauge glacier white epoxy-coated 2,5 cm square tubular steel.

Supplier: LABCONCO

Kjeldahl distillation units are designed with mounting on a base cabinet or table. One-piece borosilicate glass connecting bulbs separate liquid from vapors prior to the vapors entering the condenser and effectively traps caustic mist that may carry over to the recovery solution and One-piece borosilicate glass delivery tubes with long necks, round bottoms and thick walls to help eliminate pressure fluctuations in the distillation phase.

Supplier: LABCONCO

8-port manifold, W×D×H: 218×218×399 mm

Supplier: LABCONCO

Protector premier hoods are suitable for general chemistry applications and also explosion-proof models are available for laboratories with potentially explosive/flammable atmospheres. Hoods are available with a built-in standard fiberglass blower, or an explosion-proof fiberglass blower, or without a blower (remote blower sold separately).

Supplier: LABCONCO

This combination glove box with fibreglass lining provides inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: LABCONCO

Accessory for Freeze Dryer, Lyph-Seal™ tray dryer 230 V, EU, W×D×H: 39,6×48,8×45,5 mm, 62,6 kg

Supplier: LABCONCO

PuriCare Procedure Stations with a large sash opening create a particulate-free environment for small animal research activities such as cage changing, weighing, anesthesia delivery and surgical procedures.

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters, carbon filters, or a combination of both HEPA and carbon filters.

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters.

Supplier: LABCONCO

Evaporator, Centrifugal, Glass trap, 2550 ml, for use in FreeZone freeze dry units

Supplier: LABCONCO

The FreeZone® bulk and stoppering tray dryers have a stainless steel interior and epoxy coated, stainless steel exterior. Units include three probes for monitoring sample and shelf temperature. Microprocessor controlled temperature programming from −40 to +40 °C during ramping and holding in stoppering tray dryers, whereas in bulk dryers a microprocessor maintains the system temperature within 3 °C of the set point (maximum 60 °C). Units have an LCD display and audible/visual alarm indication for temperature and vacuum changes.

Supplier: LABCONCO

Accessory for freeze dryer, 16-port drying chamber, stainless steel 330×330 mm, for Freezone® 6, 12 and 18

Supplier: LABCONCO

Solid epoxy dished work surface, for 91,4 cm enclosures, 34 kg, 914×737×25,4 mm

Supplier: LABCONCO

The refrigerated CentriVap centrifugal concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. The concentrator combines a refrigeration system that cools to −4 °C with a heater that warms to 100 °C to achieve the user's desired set point temperatures. With an epoxy-coated aluminum chamber.

Supplier: LABCONCO

Racks and supports hold test tubes, flasks and microwell plates for pre-freezing and freeze drying samples; clear canister holds chemical traps.