1031 Results for: "JULABO GmbH"

Supplier: JULABO GmbH

Tube clamps for CR® tubing ( I.Ø 8 mm), size 1

Supplier: JULABO GmbH

The compact AWC100 air to water recirculating cooler is designed to remove small heat loads from external systems where cooling water can be above ambient and where temperature control is secondary. Coolers which do not have a refrigeration unit are ideal for use in circuits with Peltier elements, analytical devices, polarimeters, refractometers and CCD cameras. The ventilator speed (i.e. the cooling capacity) can be adjusted in two stages, cooling capacity depends on the temperature difference between return line temperature and ambient temperature. The cooling principle: Warm bath fluid is pumped through the heat exchanger. The heat exchanger is cooled by a ventilator motor and thus removes the produced heat.

Supplier: JULABO GmbH

JULABO AQUA STABIL is a water disinfectant for use in open baths. This disinfectant prevents contamination of the bath fluid and ensures a longer service life when performing temperature control applications with water. The germicidal effect prevents the formation of algae, bacteria, and microorganisms.

Supplier: JULABO GmbH

Compact, ergonomically designed chillers which have integrated stainless steel tanks with large volumes. Models can be either air or water cooled. Applications include use with rotary evaporators, autoclaves, reaction vessels and for routine laboratory cooling. All units have an LED temperature display for actual/set point integrated into a splash-proof keypad and recessed grips for easy relocation integrated in the housing. A hinged tray serves as a compartment for the operating manual and other documents. The removable venting grid allows for easy cleaning of the condenser. Venting slots are located on the front and back, allowing units to be placed directly next to each other. Models FL2503 to FLW11006 have an early warning function with sensor monitoring to signal if the condenser is dirty, and online diagnostics with 'BlackBox' function.

Supplier: JULABO GmbH

Ultra-low temperature refrigerated circulators for heating and cooling. The units are suitable for external temperature applications with simultaneous operation in the bath tank. The units provide particularly high heating and cooling capacities for rapid heating and cooling times even for large volume, external systems. FP models offer proportional cooling control to ensure energy saving performance and to reduce heat generation to the environment. Models with the designation W are water cooled. All models have handles and castors which allow easy transportation and drain ports for conveniently draining the bath fluid. The units offer an improved insulation to prevent ice formation and have a filling level display. Typical applications: Temperature control of jacketed reaction vessels, autoclaves, mini plant installations, kilo labs, freezing point determination, calibration at low temperatures and petroleum testing.

Supplier: JULABO GmbH

High temperature circulators can be used for temperature applications up to 400 °C; units provide powerful heating capacities for shortest heat-up times and rapid compensation of endothermic reactions. Applications include use with reactors, autoclaves, distillation columns, mini plant installations, pilot plants and production facilities. Because of the closed circuit system oxidation is reduced and unpleasant odours and vapours do not escape, even at high temperatures.

Supplier: JULABO GmbH

PURA stainless steel water baths are functional and reliable for everyday operations due to their high material and component quality. The easy to use PURA water baths offer a number of functions and features that enable efficient use in the laboratory.

Supplier: JULABO GmbH

Y-adapter cable for connecting 1 dual PT100 sensor to 2 Lemosa sockets for LC temperature laboratory controller

Supplier: JULABO GmbH

Fulfil temperature-dependent measurement, control, safety and monitoring tasks for heating mantles, heating baths and heating mats.

Supplier: JULABO GmbH

Compact refrigerated/heating circulators which can be used on benchtop or in a fume hood, ideal for temperature control of distillation apparatus or mini plant installation. All four models feature pump connections for external temperature applications and a bath opening for temperature control of small objects directly in the circulator bath. The maximum ambient temperature of +40 °C and air cooled ventilation means the units can be positioned alongside other units or directly in a fume hood.

Supplier: JULABO GmbH

Unstirred water bath

Supplier: JULABO GmbH

DYNEO™ DD refrigerated circulators are powerful cooling units suitable for internal or external applications between –50 and +200 °C. The circulators function precisely and reliably even at elevated ambient temperatures up to +40 °C. The multilingual 8,89 cm colour display and unique rotary knob allow straightforward and intuitive operation. Units have ergonomic handles and a built in drain tap for easy and safe drainage.

Supplier: JULABO GmbH

Stainless steel shaking water baths are suitable for unsupervised continuous operation. The bright, LED Multi-Display showing up to six temperature values is visible from across the lab. Advanced microprocessor technology with PID temperature control eliminates temperature overshoot and provides high temperature stability. Sensitive samples are well protected; as soon as the high and low temperature limits are reached an intermittent tone sounds. If the liquid in the bath reaches a minimum, the unit shuts down completely and a continuous single tone sounds.

Supplier: JULABO GmbH

VALEGRO Ethernet Activation

Supplier: JULABO GmbH

Tubing for circulator, Viton®, Tubing int.Ø: 12 mm

Supplier: JULABO GmbH

2× adapters, G 1 ¼" female to barbed fitting for tubing ¾" inner diameter

Supplier: JULABO GmbH

Hollow PP balls, 20 mm Ø, For: Open heating baths, heating circulators, water baths and shaking water baths

Supplier: JULABO GmbH

Rack, Test tube, Test tube racks, up to 100 °C, for TW8, TW12, TW20, SW22, SW23, For tube Ø: 16/17 mm, No. of Holes: 50

Supplier: JULABO GmbH

DKD 5 point calibration certificate, For: Calibration baths

Supplier: JULABO GmbH

The powerful and robust CORIO™ laboratory circulators provide the exact temperature, absolute precision and a wide working temperature range. The CORIO™ C immersion circulator is the basic model, it is ideal for standard internal applications, the CD model is more advanced and can used for temperature control of external applications if required. The jet nozzle allows continuous adjustment of the pump stream in the bath. The stainless steel baths are durable and have an integrated drain tap (except B5). These open heating bath circulators are ideal for temperature control of samples, preparation of samples for serology and clinical chemistry, analysis, and material testing. The CD-B units are ideal for external temperature control applications in combination with measuring instruments, measuring cells, photometers, refractometers and polarimeters.

Supplier: JULABO GmbH

The MAGIO™ series of cooling and heating circulators operate with a working temperature range of –50 to +300 °C and heating capacity of up to 3 kW. With their powerful pressure/suction pump the MAGIO™ units are ideal for external temperature applications. An extensive range of accessories and excellent dynamics mean that the MAGIO™ circulators can be modularly and individually adapted to applications.

Supplier: JULABO GmbH

FD flow through coolers are used for cooling a loop circuit of a closed system, the unit must be connected in the return line of a heating circulator. The compact, easy to use units are suitable for a variety of cooling applications.

Supplier: JULABO GmbH

Calibration baths have been designed for applications in calibration laboratories such as ISO, DKD, NAMAS, UKAS and conform to the requirements according to DIN EN ISO 9001:2000. Units have a chamber at a constant temperature level and can be used for precise calibration of temperature sensors, measuring instruments, thermometers according to national and international standards. Refrigerated models are suitable for use at temperatures from −30 to +200 °C as well as use as calibration baths for temperatures from 50 to 300 °C. With the optional precision reference sensor it is possible to measure the reference temperature. Baths feature a PID cascade temperature control for highest internal and external temperature stability and an integrated programmer with 10 program steps.

Supplier: JULABO GmbH

The powerful and robust CORIO™ laboratory circulators provide the exact temperature, absolute precision, and a wide working temperature range. The CORIO™ CP model is an advanced unit with professional technology for demanding applications and can be used for temperature control of internal or external applications due to the powerful and infinitely adjustable pressure pump. The jet nozzle allows continuous adjustment of the pump stream in the system. These heating circulators are optimised for external temperature applications in combination with jacketed reactors, distillation apparatus, mini-plant applications, photometers, refractometers and can also be used for internal temperature applications of samples and small objects.

Supplier: JULABO GmbH

Heating immersion thermostats with wide range of functionality and features for your applications.

Supplier: JULABO GmbH

PRESTO® systems cover a working temperature range of −93 to +250 °C with high cooling and heating capacity. These instruments can compensate for exothermic and endothermic reactions with extraordinary speed, they feature high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature control of liquid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to long service life. The integrated touch panel gives the user a clear view of important information. Fingertip control via the touch screen. Multiple interfaces enable remote control of the PRESTO® across networks and in super-ordinated control systems. Wireless remote control of the new PRESTO® can easily be done by using the Wireless TEMP range of products.

Supplier: JULABO GmbH

VALEGRO recirculating coolers are environmentally-friendly all-rounders for a wide range of temperature control tasks. They are characterised by a good ratio between cooling capacity and unit size as well as optimal usability. They work with natural refrigerant and can be adapted to application requirements thanks to their adjustable pump.

Supplier: JULABO GmbH

USB 2.0 repeater extension cable, 5 m, For: CORIO models, PRESTO A30, PRESTO A40, PRESTO A45, PRESTO A45t, PRESTO A80, PRESTO A80t, PRESTO A85, PRESTO A85t, PRESTO W40, PRESTO W50, PRESTO W50t, PRESTO W80, PRESTO W80t, PRESTO W85, PRESTO W85t, PRESTO W91, PRESTO W91t, PRESTO W91tt, PRESTO W91tx, PRESTO W91x, PRESTO W92, PRESTO W92t, PRESTO W92tt, PRESTO W92ttx, PRESTO W92tx, PRESTO W92x

Supplier: JULABO GmbH

The powerful and robust CORIO™ laboratory circulators provide the exact temperature, absolute precision and a wide working temperature range. The CORIO™ C immersion circulator is the basic model, it is ideal for standard internal applications, the CORIO™ CD model is more advanced and can be used for temperature control of external applications if required. The jet nozzle allows continuous adjustment of the pump stream in the bath. The transparent polycarbonate baths are durable and enable the user to easily view items in the bath.

Supplier: JULABO GmbH

Transparent PC bath tanks in different sizes. For use with all CORIO C and CD circulators.