1958 Results for: "Heidolph Instruments GmbH & Co.KG"

Supplier: Heidolph Instruments GmbH & Co.KG

These Hei-VAP devices, with hand lift, are ideally suited for all standard applications. Parameters can be controlled with the simple turn of a knob.

Supplier: Heidolph Instruments GmbH & Co.KG

Complete sets consisting of tube drive, pump head, and tubing. Ready-to-use.

Supplier: Heidolph Instruments GmbH & Co.KG

Set of different shaped PTFE covered magentic stirring bars.

Supplier: Heidolph Instruments GmbH & Co.KG

Platform shaker with rocking motion, designed for homogeneous mixing, ideal for flasks, media bottles and large vessels. Units have analogue dial controls for rocking frequency and time.

Supplier: Heidolph Instruments GmbH & Co.KG

Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C. Receiver cassettes protect against threat of glassware breakage.

Supplier: Heidolph Instruments GmbH & Co.KG

Non-flammable thermal fluid for heating and low-temperature range. Thermal fluid for Hei-CHILL chillers.

Supplier: Heidolph Instruments GmbH & Co.KG

Magnetic hotplate stirrer with microprocessor control. Ceramic coated silumin plate provides excellent heat conduction and distribution and is extremely resistant to scratches and chemicals. An independent safety circuit switches off the heating if a user determined temperature difference (ΔT 10 to 25 °C) above set temperature is reached. No unintentional changes to temperature settings. Indicator on the display shows when unit is off and residual heat is higher than 50 °C. Optional medium temperature sensor uses two independent PT1000 sensors double checking each other. Electronic current limiting to protect the motor. TRIAC guarantees long service life.

Supplier: Heidolph Instruments GmbH & Co.KG

The cassettes can be replaced while the device is pumping. The contact pressure of the rollers is adjusted by means of an adjusting screw. Tubes of various materials and sizes can be inserted in any cassette.

Supplier: Heidolph Instruments GmbH & Co.KG

Peristaltic pump heads SP standard 1,6 mm and SP standard 2,5 mm: For simple pumping tasks. Housing made from die-cast aluminium. Rollers made from stainless steel, roller bearings made from polyamide. Rotor equipped with 2 convex rollers; cell cultures will not be damaged. For tubing with wall thickness of 1,6 or 2,5 mm. Rated flow: 0,5 to 3644 ml/min (depending on the drive and tubing used).

Supplier: Heidolph Instruments GmbH & Co.KG

Transfer tubing, Tubing int.Ø: 0,5 mm, Tubing ext.Ø: 6,5 mm

Supplier: Heidolph Instruments GmbH & Co.KG

Fluorocarbon rubber, thermoformed Viton B (67% fluorinated), opaque black.

Supplier: Heidolph Instruments GmbH & Co.KG

These Hei-VAP devices with hand lift are optimally suited for all standard applications. Parameters can be controlled with the simple turn of a knob.

Supplier: Heidolph Instruments GmbH & Co.KG

5 liters cooling liquid for Hei-CHILL Pro recirculation chillers

Supplier: Heidolph Instruments GmbH & Co.KG

The magnetic stirrer Hei-PLATE Mix 'n' Heat Expert convinces with its intuitive handling. You have an easily legible eye on all values and settings at any time.

Supplier: Heidolph Instruments GmbH & Co.KG

Rotavac Vario
Three stage diaphragm pump is made from chemically resistant material.
For all Hei-VAP models
Precise vacuum control avoids bumping and eliminates foaming of your evaporation solution
Due to automatic vacuum supply to the process parameters you have more time for important laboratory activities
Can be combined with a condenser

Supplier: Heidolph Instruments GmbH & Co.KG

Overhead shaker with one dimensional swirling action, designed for homogeneous mixing, ideal for haematology, medical diagnostics, materials testing and biochemistry. Units have analogue control for adjusting speed setting.

Supplier: Heidolph Instruments GmbH & Co.KG

Overhead stirrer for basic requirements, the unit has large control dials and convenient analogue speed settings. The shaft accommodates stirring elements with shafts up to 8 mm in Ø.

Supplier: Heidolph Instruments GmbH & Co.KG

For routine distillation applications and reproducible results.

Supplier: Heidolph Instruments GmbH & Co.KG

Promax shakers have a one dimensional back and forth motion for vigorous mixing of flasks and separating funnels in chemical applications, using analogue dial controls for reciprocating frequency. The encapsulated housing ensures virtually no heat transfer from motor to platform and a sealed drive is isolated from spills.

Supplier: Heidolph Instruments GmbH & Co.KG

Test tube adapter, Adapter for 20 test tubes

Supplier: Heidolph Instruments GmbH & Co.KG

Made from stainless steel.

Supplier: Heidolph Instruments GmbH & Co.KG

Made from stainless steel.

Supplier: Heidolph Instruments GmbH & Co.KG

Multi-channel pump heads, models C4, C8, and C12. Can be used in combination with peristaltic pump drives PD 5001, PD 5101, and PD 5201 with the multi-channel adapter. Up to 12 pump channels can be operated simultaneously. Separate metering to different containers in a single operation.

Supplier: Heidolph Instruments GmbH & Co.KG

Polydimethyl siloxane with siliceous earth and silicone additives; translucent white, excellent resistance to initial pressure.

Supplier: Heidolph Instruments GmbH & Co.KG

Hei-PLATE Sensor Advanced Package Core.

Supplier: Heidolph Instruments GmbH & Co.KG

Adds numerous smart features to the Hei-VAP Ultimate, as well as an overview of all parameters and the current process.

Supplier: Heidolph Instruments GmbH & Co.KG

These evaporators are equipped with proven smart details such as Easy-Clip, patented clamping sleeve, lift stop to limit immersion depth and universal 5 L heating bath.

Supplier: Heidolph Instruments GmbH & Co.KG

Comprehensive spectrum of services for demanding temperature control tasks with a cooling capacity of 5000 W.

Supplier: Heidolph Instruments GmbH & Co.KG

Coupling, large for Laborota 20 control, For: Heidolph Laborota 20 control

Supplier: Heidolph Instruments GmbH & Co.KG

Boss head made of anodised aluminum, used to fix retort clamps to stand rods for perfect vertical alignment.