1164 Results for: "Hanna"

Supplier: Hanna

Ink cartridge for printer, For: Hanna HI 123

Supplier: Hanna

Accessory for turbidity meter, Round glass cuvettes, For: HI-93703

Supplier: Hanna

Turbidity Standard, Turbidity calibration solution, produced according to the AMCO AEPA-1 standards, 10 FTU, Type: Polymer suspension

Supplier: Hanna

This high-performance digital thermometer is designed for Laboratory and field use. It is a thermistor thermometer that can be fitted with an optional rubber holster for use outdoors. Current temperature is simultaneously shown along with the highest and Lowest values since switch on.

Supplier: Hanna

The HI 93532 features two K-type connectors. It displays current temperature, high and low values in each channel. The CAL button allows to perform a one point calibration in an ice bath at 0 °C when probe interchange occurs.

Supplier: Hanna

The HI-93728-01 and HI-93728-03 nitrate reagents are suitable for use with the HI-96728 portable photometer and the HI-83200-02 and HI-83099-02 multiparameter bench photometers.

Supplier: Hanna

pH meter, Spare DO probe HI 769828-2

Supplier: Hanna

Hanna pocket checkers offer a cost-effective digital alternative to visual chemical test kits. Ideal for regular water testing, swimming pool testing and for aquaculture hobbyists.

Supplier: Hanna

The HI 96101 multiparameter photometer is used to measure Bromine, Free and Total Chlorine, Cyanuric Acid, Iron, Iodine and pH content in water and wastewater samples. The reagents are in powder and liquid form depending on the parameter.

Supplier: Hanna

Generally, ground and surface water contains no more than 1 mg/L (ppm) iron; but due to mining and industrial drainage, higher levels of iron have been observed. In domestic water, for instance, iron can unpleasantly alter the taste, stain laundry, damage kitchenware and favor the growth of certain bacteria. Iron is also an indicator of ongoing corrosion in industrial plants or in water cooling and heating systems. Moreover, iron is normally monitored in mining wastewater to avoid contamination.

Supplier: Hanna

CAL Check™ Standard for Nitrite (high range) 0,0 and 75 ppm, CAL Check™, : N/A

Supplier: Hanna

The HI4102 bromide-selective electrode is used for the determination of free bromide ions in emulsified food products, beverages, plants, soils and as an indicator for titration.

Supplier: Hanna

Compact, easy to use all-in-one pH meters, ideal for teaching.

Supplier: Hanna

The HI4101 ammonia-selective electrode is used for detecting gases that have been dissolved in a solution. The detection element is separated from the test solution by a gas permeable membrane.

Supplier: Hanna

This reliable and easy to use meter comes with pre-amplified pH electrode and internal temperature sensor. This instrument is ideal for applications that require a custom calibration point. Manual calibration can be extremely useful in order to achieve better accuracy.

Supplier: Hanna

Range of microprocessor controlled, handheld, single parameter colorimeters using a monochromatic LED and chemical reagents to promote a colour change within the sample.

Supplier: Hanna

The HI-83214 multiparameter photometer is a compact instrument designed for COD analysis in accordance with EPA 410.4 and ISO 15705:2002 standards. It also features different parameters, ranges and methods making it suitable for a wide range of water testing applications.

Supplier: Hanna

The Hanna HI-839800 thermo-reactor is an easy to use test tube heater with the capacity to perform up to 25 simultaneous digestions. Complete with a countdown timer, it can be used for timed or infinity testing procedures. Robust and durable, the main body is machined from a single block of metal. Temperature within the block is controlled using a sophisticated electronic thermostat and can be verified by placing a thermometer in the temperature well provided.

Supplier: Hanna

Reagents for copper, 0,00 - 5,00 mg/l, kit for 300 tests, For: Ion meter HI 93702 (copper)

Supplier: Hanna

These electrodes feature a built-in microchip that stores sensor type, serial number, and calibration information including date, time, offset, slope, probe condition and buffers used. This information is automatically retrieved by edge® once the electrode is plugged in. The ability to transfer information allows for hot swapping of probes without having to recalibrate.

Supplier: Hanna

The HI 935005 (single channel) is a waterproof thermometer. It can be switched off after 8 or 60 minutes of non-use, or it can be deactivated.
The HI 935002 (dual channel) thermometer is suitable for extended use in the field. The difference between the two channels can be displayed. Data is continuously updated on one channel or the other.

Supplier: Hanna

These HI140 dataloggers are designed to monitor temperature continuously over long periods of time.

Supplier: Hanna

HI 83200 is a versatile photometer capable of measuring up to 44 methods, critical to analysing water quality. The optical system is based on special subminiature tungsten lamps and narrow-band interference filters to guarantee both high performance and reliable results.

Supplier: Hanna

This advanced benchtop meter offers all the advanced capabilities for accurate pH measurement with the added feature of a built-in printer (with 44 mm plain paper).

Supplier: Hanna

HI-3090T is a combination glass body ORP electrode with platinum sensor.

Supplier: Hanna

K-type probe, Standard, 0…+900 °C, Ø×L: 5×220 mm

Supplier: Hanna

Ammonia solution 0.1 mol/l (0.1 N)

Supplier: Hanna

These technical calibration buffers produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionised water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers.

Supplier: Hanna

Compact and lightweight each stirrer is equipped with a speed sensing device coupled with a frequency voltage converter to monitor the speed and ensure optimum safety every time it is used.

Supplier: Hanna

Battery, For: Conductivity Testers, Replacement batteries for conductivity tester, 1,5 V, Voltage: 1,5 V