1483 Results for: "HAMILTON BONADUZ"

Supplier: HAMILTON BONADUZ

Neuros™, Needle, Replacement needles for 700/1700 series Neuros™ syringes, Gauge: 33, Length: 77 mm, Type of tip: 3

Supplier: HAMILTON BONADUZ

A variety of electrolyte solutions for pH and ORP electrodes.

Supplier: HAMILTON BONADUZ

Kel-F® hub (KF) needles can be used with Luer Tip (LT) and PTFE Luer Lock (TLL) syringes and connectors. Custom lengths and point styles are available.

Supplier: HAMILTON BONADUZ

Robust combination pH electrodes for daily laboratory use. Universally applicable, in strong acids as well as in strong bases.

Supplier: HAMILTON BONADUZ

The PB600-1 works with Microliter™ or Gastight® syringes from 10 µl to 2,5 ml. Use the repeating dispenser with cemented needles (N), removable needles (RN), Luer tip (LT), or PTFE Luer lock (TLL) syringes.

Supplier: HAMILTON BONADUZ

RCX-30 carbohydrate analysis columns are designed for the isocratic or gradient separation of carbohydrates. When an isocratic method is used with a conductivity, refractive index, ultraviolet, or pulsed amperometric detector (PAD), mono and disaccharides such as glucose, fructose, sucrose and lactose can be quickly determined.

Supplier: HAMILTON BONADUZ

HC-75 columns separate compounds through ligand exchange. The different forms of the HC-75 (hydrogen, calcium and lead) each provide a unique selectivity for separating varying types of charged analytes based on electronegativity toward the counterion.

Supplier: HAMILTON BONADUZ

The 600 series syringes are a half stroke version of the original 700 series syringes. This series of syringes is ideal for dispensing volumes from 0,25 μl up to 5 μl. The 600 series is often used in applications that require one handed operation because of the short stroke length and the reinforced plunger.

Supplier: HAMILTON BONADUZ

Silica-based 100 Å columns for general reversed phase separations.

Supplier: HAMILTON BONADUZ

The 900 series syringe is the economical version of the 800 series syringe. This series of syringes is ideal for dispensing volumes from 0,5 μl up to 10 μl. The syringe holder is permanently attached to the syringe barrel. This reduces the initial cost of the syringe but eliminates the possibility of replacement components.

Supplier: HAMILTON BONADUZ

The compression fittings and adaptors are designed to connect Hamilton removable needle (RN) and knurled hub (KH) syringes to glass capillary tubing and PEEK tubing. The connectors can be combined in a variety of different configurations to meet most connection needs.

Supplier: HAMILTON BONADUZ

Specifically designed for rapidly cleaning 7000 series modified Microliter™ syringes, this syringe cleaner also effectively cleans Microliter™ and Gastight® syringes. A combination of heat (approximately 370 °C) and vacuum vaporises and extracts contaminants from the needle. The syringe cleaner is ineffective for septa-plugged needles, seised plungers and other irreparable needles.

Supplier: HAMILTON BONADUZ

These tips are validated to optimise the performance of the Microlab 300 system, offering superior accuracy and precision. When the tips are placed onto the probe, the O-ring on the probe compresses into the tip groove. This design only requires a low insertion force to successfully load a tip, resulting in a more ergonomic experience for the user and enabling long-term use with minimal energy exerted.

Supplier: HAMILTON BONADUZ

The Microlab® 600 dispensers are highly precise syringe pumps with a touchscreen graphical user interface designed to quickly and easily dispense liquids. This positive displacement system provides better than 99% accuracy, independent of liquid viscosity, vapour pressure and temperature. The inert fluid path minimises sample carry over and improves compatibility with harsh chemicals. There are three different dispenser models available.

Supplier: HAMILTON BONADUZ

The needle points of these thin layer chromatography syringes are covered with a PTFE coating which reduces the surface tension between the needle and the liquid making it ideal for reproducible sample spotting.

Supplier: HAMILTON BONADUZ

Syringe, chromatography, Gastight®, HPLC/GC, 1010 TLLCH, Volume: 10000 µl, Gauge: No needle included, Length: No needle included, Pk: 1

Supplier: HAMILTON BONADUZ

These syringes are used for GC autosamplers.

Supplier: HAMILTON BONADUZ

The syringe guide comes with a syringe installed from the factory. This eliminates the assembly step which can lead to damage of the smaller volume syringes. This is especially critical for 7000 series syringes which have extremely small plunger wires.

Supplier: HAMILTON BONADUZ

This line of syringes developed for Spark Holland HPLC autosamplers offer everything required of an instrument syringe: chemical inertness, long life, reduced friction, precision and accuracy.

Supplier: HAMILTON BONADUZ

These gas tight syringe are designed for HPLC autosamplers.

Supplier: HAMILTON BONADUZ

Electronic pipette for laboratory dispensing applications. The self-calibrating, microprocessor-based system reduces the possibility for human error and instrument contamination by controlling all piston movements.

Supplier: HAMILTON BONADUZ

These electrochemical oxygen sensors are ideal for applications with high demands for hygiene, e.g. in pharmaceutical industry, in biotechnology and in foods & beverages production. The sensors are equipped with a FDA approved membrane for usage in hygienic processes. They can withstand steam sterilisation, autoclavation and CIP cleanings.

Supplier: HAMILTON BONADUZ

TLL connector, For: super syringe S0500, S1000, S1500, S2000

Supplier: HAMILTON BONADUZ

CTC PAL® autosamplers are able to sample from many different vial and well types and have ultimate platform flexibility. The syringe is the most important part of every injection that the HPLC PAL® system performs. These autosampler syringes are specially designed for use in these HPLC PAL® systems: PAL® HTC-xt, PAL® HTS-xt, PAL® HTX-xt sold under the following brands: AB Sciex, Agilent, Alpha M.O.S., Antek, Bruker, Dionex, GE, Gerstel, GL Sciences, Lauda, LEAP Technologies, MicroCal, MPS, Perichrom, PerkinElmer, Shimadzu, Sotax, Thermo Scientific, Waters and Zoex.

Supplier: HAMILTON BONADUZ

GC on-column syringes with three choices of needle: Stainless steel fixed (N), stainless steel removable (RN) or fused silica removable (RNFS).

Supplier: HAMILTON BONADUZ

Syringe, chromatography, C-XP-SAL, Volume: 5000 µl, Pk: 1

Supplier: HAMILTON BONADUZ

The PRP-X100 is a polymeric column packing for separation of inorganic and organic anions from 10 to 500 ppm. These columns can be used to separate ions at concentrations from 1 to 1000 ppm without suppression or elaborate preconcentration techniques. The highly inert polymeric support resists chemical attack from organic solvents and aqueous buffers (0 - 100% aqueous or organic; pH 1 to 13), effectively lengthening column life.

Supplier: HAMILTON BONADUZ

Polymeric cation exchange packing for separation of glyphosate and its metabolite in drinking water.

Supplier: HAMILTON BONADUZ

The septum adapter connects to any PTFE Luer lock (TLL) or Luer tip (LT) syringe. The adapter seals the syringe barrel but the sample remains accessible by piercing the replaceable septum.

Supplier: HAMILTON BONADUZ

Polymer bulk packing material for reversed phase applications.