59 resultater for: "DESCO"

Supplier: DESCO

This cord with low profile helps keep employees from tripping on cord connection.

Supplier: DESCO

Desco Europe Rigid Conductive Boxes are marked with the ESD protective symbol. Boxes can be supplied with or without high density foam for insertion of component leads or low density foam which acts as a cushioning material.

Supplier: DESCO

Desco Europe packaging tape is a conventional self-adhesive PVC tape.

Supplier: DESCO

Statguard® Static Dissipative Cross-Linked Floor Finish is used to dissipate static charges as well as prevent triboelectric (static charge generation) charges while providing a clear, high gloss finish that resists wear. It meets EN 61340-5-1 ESD Floors Table 1 RG less than or equal to 1x10E9 ohms.

Supplier: DESCO

Conductive tote boxes are made from injection moulded conductive polypropylene.

Supplier: DESCO

Elastic adjustable cam-lock wrist band, 10 mm, Blue

Supplier: DESCO

Economical crepe paper tape (7.0 mils thick) with high-tack rubber adhesive are used in applications masking PCB gold features for wave soldering.

Supplier: DESCO

These tapes are ideal in packaging for container sealing, static shielding bag closure and holding DIP tubes.

Supplier: DESCO

Wescorp heel ground with one Megohm resistor are designed to satisfy Footwear requirements of IEC 61340-5-1.

Supplier: DESCO

Reztore® Surface and mat cleaners removes dust, grease, grime, fingerprints, solder flux and other contaminants from ESD mats and other surfaces.

Supplier: DESCO

Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface.

Supplier: DESCO

Elastic adjustable wristband, 10 mm, Yellow

Supplier: DESCO

The SCS 724 workstation monitor continuously monitors the path-to-ground integrity of two operators and one conductive or dissipative worksurface.

Supplier: DESCO

Wrist strap (2209) is designed for one-time use. The wrist strap is ideally suited for shipment along with ESD sensitive items [ESDS], providing the means to ground personnel opening ESDS packaging and installing contents.

Supplier: DESCO

ESD workstation cover protects the workstation from ESD, dust and other contaminants.

Supplier: DESCO

These plugs to fit UK European CEE (7) VII Schuko sockets as used in Belgium, France, Germany, Holland, Spain. The Europe Earth Bonding Point (EBP) plug is designed to provide a common ground point for grounding using protective earth in an ESD protected area (EPA). The plug fits into the mains supply socket, making a connection with the earth conductor only. In place of the live and neutral pins are moulded insulating plastic pins to allow positive location in the socket. Connectors on the front of the plug are available for connection via ground cords to the various elements of the EPA. Thus each element is held at a common potential.

Supplier: DESCO

This aluminised moisture barrier bag is designed to provide packaging for ESD and moisture sensitive items, both inside and outside an ESD protected area. The bags are heat sealable and suitable for vacuum packaging.

Supplier: DESCO

The Universal snap mounting kit consists of 10 mm stud and socket, threaded backing washer, conical nut, long and short screw, ESD common ground point label.

Supplier: DESCO

The Dual-Wire thermoplastic wrist strap consists of an insulative exterior with a conductive interior and a 3,4 mm dual conductor jack. The wrist strap is lightweight, low profile, and safely makes contact with human skin.

Supplier: DESCO

For use with non-ESD sensitive items destined for use in an EPA.

Supplier: DESCO

The Dual-wire fabric wristband is available in one size that adjusts to almost any size wrist for reliable protection.

Supplier: DESCO

These facemasks constructed of a lightweight dissipative material which is made from texturised polyester and a minimum of 9% carbon nylon monofiliment.

Supplier: DESCO

Round Velostat® container ideal for static-safe storage, kitting, and in-process handling and transporting of static-sensitive assemblies and devices.

Supplier: DESCO

Designed to be used with a coiled cord (included with wrist straps) with a one megohm current limiting resistor meeting the EN 61340-5-1.

Supplier: DESCO

This foil moisture barrier bag provides protection for ESD sensitive and moisture sensitive electronics, typically SMT (Surface Mount Technology) items.

Supplier: DESCO

Transparent metal-in static shielding bag provides a static safe environment for ESD sensitive electronic devices (ESDS).

Supplier: DESCO

This provides a storage terminal for the wrist cord when the workstation is unoccupied.

Supplier: DESCO

Antistatic waste bags are non-tribocharging and are designed for use in ESD protected areas where electrostatic sensitive devices are present. Even at low humidity they do not become charged with static electricity.

Supplier: DESCO

These grounders will not mark shoes or floors - reducing maintenance costs of touching up on floors. Size adjustable material expands to fit most shoe sizes comfortably and flex during walking.

Supplier: DESCO

Works with standard electrical systems in Europe, United Kingdom and Asia.