1188 Results for: "Bohlender"

Supplier: Bohlender

Opaque black polycarbonate panels reduce light incidence and protect samples from ultraviolet radiation. Door with snap fit closing and integrated gasket ensuring easy opening and tight closure. Temperature resistant from −35 to +70 °C, suitable for use under normal pressure.

Supplier: Bohlender

Clear polycarbonate desiccators for gas filling with single door with snap fit closing and integrated gasket ensuring easy opening and tight closure.

Supplier: Bohlender

Transparent PFA bottle with white PTFE frit.

Supplier: Bohlender

Orange acrylic cabinets have a reinforced aluminium frame, door with foam rubber gasket and magnetic strip, orange acrylic panels reduce light incidence and protect against ultraviolet radiation. Especially suitable for storage of light-sensitive substances

Supplier: Bohlender

This blue screw cap is made of PP with GLS threads. with movable reduction body made of PTFE for transition to GL threads. The body can be moved independently from the screw cap so that the completely assembled reduction can be removed and fixed on another vessel without the risk of disarranging the tubing or cable. The product is only exposed to PTFE.

Supplier: Bohlender

Two-part quick connector is made of PFA, with two GL threads. When disconnected, the flow is interrupted by means of built-in non-return valves.

Supplier: Bohlender

PTFE, white.

Supplier: Bohlender

Used for temperature measurement in aggressive liquids and cable provides flexible connection from measuring device to medium.

Supplier: Bohlender

Straight fitting, made of PTFE, with two connectors for elastic tubing (e.g. Viton®, Tygon®, silicone).

Supplier: Bohlender

Stirrer blades made from PTFE, with a set of clamp screws made from a PTFE/PEEK compound.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: Bohlender

Replacement shelf with two rails, PMMA transparent, SICCO, For: Vaccum desiccator

Supplier: Bohlender

Funnel made of PE / static dissipative PE-EX for liquid waste disposal. The funnel can be safely mounted on the waste container with its freely turnable cap that is safely fixed with the filling neck.

Supplier: Bohlender

Very good electric conductivity due to a special 'anti-static compound' made of pure PTFE and highly pure carbon dust (less than 2,5%).

Supplier: Bohlender

Assortment of remainder tubing, BOLA

Supplier: Bohlender

Y-shaped connector made of PE-EX.

Supplier: Bohlender

Pipe clamp made of PE with permanently fixed power magnets. b.safe Waste Pipes can easily be clipped into the pipe clamp for tube Ext.Ø 32 mm.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

Excellent electric conductivity due to a special 'antistatic compound' made of pure PTFE and finest, highly pure carbon dust (less than 2,5%). Colour: black.

Supplier: Bohlender

Filter body made of PE with connection thread for direct installation on barrels. Lid with aeration openings and label field to monitor service life. Filling made of activated carbon for adsorption of solvents.

Supplier: Bohlender

Adaptor for installation of capillaries with b.safe fittings at the exhaust filter connection of the b.safe waste caps.

Supplier: Bohlender

Insert with screw-in thread for barrels or screw cap for canisters. With integrated level indicator to monitor the liquid level during filling as well as a neck with GL 45 thread for the assembly of a b.safe funnel with GL 45 thread.

Supplier: Bohlender

Laboratory flask made of Borosilicate glass including screw cap and spout made of PP.

Supplier: Bohlender

T-shaped connector made of static dissipative PE-EX.

Supplier: Bohlender

Flexible tube tag to stick on capillaries and tubes with Ext.Ø 0,4 to 6,35 mm, assorted colours (5 colours per pack).

Supplier: Bohlender

Dimensionally stable basic vessel and screw cover made of TFM, homogenous, non porous surface.

Supplier: Bohlender

PTFE, with spout.

Supplier: Bohlender

Base, upper head connections and frit made from PTFE, column body, riser, inlet and outlet tubes made from FEP.

Supplier: Bohlender

Evaporating dishes are made of PTFE.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel with the stirring unit made completely of PTFE.