Supplier: Bohlender

Flexible corrugated tubing.

Supplier: Bohlender

Tube end fittings with male thread and PA washers.

Supplier: Bohlender

Set consisting of (1) base plate with female thread M8, (1) threaded rod M8, length 200 mm, (1) pipe clamp with female thread M8 for tube ext.Ø 32 mm, and fastening material for assembly on walls or under desktops.

Supplier: Bohlender

Enclosed housing for installation at the rear side of a safety cabinet. Unit provides safe signal exchange between explosion-hazardous and explosion-proof areas by galvanic isolation of the sensor side and the output side.

Supplier: Bohlender

Contact area with silicone-free glue pad and 2 bores Ø 4,2 mm for non-slip fixing on the desktop.

Supplier: Bohlender

Combination of capillaries and tubes of several HPLC systems in one desktop mount.

Supplier: Bohlender

Angular piece approx. 90° made of static dissipative PE-EX.

Supplier: Bohlender

Display unit to monitor connected fill-level sensors in b.safe Waste Caps and b.safe System Waste Caps.

Supplier: Bohlender

Display unit to monitor connected fill-level sensors in b.safe Waste Caps and b.safe Waste Caps.

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: Bohlender

Screw cap for thread GL 25 made of PPS with rotary elbow fitting with male thread GL 25 and drip edge at female thread GL 25.

Supplier: Bohlender

PTFE stirrers: These stirrer tools have a PTFE coated stainless steel shaft, and the U-shaped stirrer blade is made entirely of PTFE. Ideal for mixing viscous liquids. Strong, tangential flow with shear rate in the margin area, little sediment on the wall of the vessel.

Supplier: Bohlender

Connectors for tubing, made of PTFE, Y-shape.

Supplier: Bohlender

Centrifugal stirrer blades made of PTFE consisting of 2 paddles, bolt and clamp ring.

Supplier: Bohlender

Made of PFA, transparent with screw-cap.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the impeller completely made of PTFE with three blades bent backwards.

Supplier: Bohlender

Tubing connectors, T-shaped, made of PTFE, for flexible tubings.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the paddles made of PTFE.

Supplier: Bohlender

Made of glass-fibre reinforced PTFE.

Supplier: Bohlender

Powder funnels, made of borosilicate glass with outlet pipe of PTFE, connection with GL screw caps of PPS or ground joint.

Supplier: Bohlender

PTFE, white.

Supplier: Bohlender

PTFE, translucent.

Supplier: Bohlender

Conductive corrugated tubing with nominal width and circular corrugations around the longitudinal axis.

Supplier: Bohlender

Desiccator cabinets, PC ESD, have a reinforced aluminium frame with panels made of antistatic polycarbonate and an easy to read electronic hygrometer. They are mainly used for temporary storage of components for electronic products.

Supplier: Bohlender

Screw cap made from PP, base body made from PTFE and gas inlet pipe/gas distributor made from FEP.

Supplier: Bohlender

Miniature distributors, made of PTFE, with female thread UNF ¼" 28 G, blockshaped, with holes for mounting (2×Ø 3,5 mm).

Supplier: Bohlender

Dropping funnel with fine adjustment stopcock having cone size 29 made of PTFE.

Supplier: Bohlender

Dish, made of PTFE, white.

Supplier: Bohlender

Evaporating dishes, PFA, with spout.

Supplier: Bohlender

PTFE, white.