Cleanroom hoods, Tyvek® IsoClean®, model IC 668B MS
: DuPont
This hood is made of Tyvek®, a flash spun high density polyethylene. The fabric is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size) and is ultra-low linting.
- Full face opening with loops and ties
- Bound seams: tightly sewn seam is covered with garment fabric to reinforce seam protection and reduce potential for liquid and particle penetration
- Clean processed and gamma sterilised
- Sterility assurance level (SAL) of 10⁻⁶
Ideal for use in the biotech, pharmaceutical, medical device manufacturing and electronics industries, as well as in other critical or controlled environments.
Face opening circumference: 489 mm
Side length: 444,5 mm
Bottom width: 724 mm
: (EU) 2016/425; Cat III, Type PB [6-B]; EN 14126
: Individually packaged in an opaque bag and placed in double transparent poly liners. Packed under ISO Class 4 cleanroom conditions. 100 per box.
- Catalog No:
- 113-8645
- Fabric:
- Tyvek®
- Cleanroom class:
- 100/ISO 5; EU GMP (A/B)
- Gender:
- Unisex
- Garment application:
- Cleanroom
- Water resistance:
- 7 kPa
- Tensile strength:
- >30 N
- Thickness:
- 185 µm
- Weight:
- 45 g/m²
Cleanroom_Whitepaper_Advantages of IsoClean_EN_Final DUPONT™ TYVEK® ISOCLEAN®Sizing Chart Accessories
CoC_DUPOIC668BWHMS_AHS1636307 CoC_DUPOIC668BWHMS_AHS2034166 CoC_DUPOIC668BWHMS_AHS2130153 CoC_DUPOIC668BWHMS_AHS2145171
Controlled_Environments_Catalogue_2016_EN DUPONT™ TYVEK® ISOCLEAN® DUPONT™ TYVEK® ISOCLEAN® FAQ Poster Non-Sterile Cleanroom Gowning Procedure