You searched for: Environmental Test Kits
Determine the concentrations of a wide range of gases and chemicals in the environment, whether by air, water, or soil sampling. Portable, convenient handheld units are ideally suited for field analysis of samples. All instruments are easy to use with accurate readings for reliable service. Continual testing of the environment ensures that ongoing safety measures are being enforced properly and that the integrity of the ecosystem is intact.
Test kits, photometric, COD, LCK cuvette tests
Supplier: Hach
Cuvette tests for water testing applications. Pre-dosed reagents for maximum safety.
Expand 8 Items
NANOCOLOR® Photometric Tube Test Kits for Cyanide
Supplier: MACHEREY-NAGEL
Photometric test kits for the determination of cyanide in water samples.
Expand 2 Items
Test kits, complete boiler and cooling water, drop count titration
Supplier: Hach
This kit is used for controlling boiler and cooling water treatment and checking corrosion using the drop count test which is a simple volumetric/ titration method with colour indication. It is an economical solution for the operation of modern boilers and cooling towers.
Expand 1 Items
Reagent set, alkalinity (total), VISOCOLOR® ECO
Supplier: MACHEREY-NAGEL
Designed for photometric determination of alkalinity (total) with bromphenol blue at 2 different wavelengths.
Expand 1 Items
Colorimetric rapid tests, detergents, VISOCOLOR®
Supplier: MACHEREY-NAGEL
The VISOCOLOR® testkits are devided into VISOCOLOR® alpha, ECO and HE. Every product range offering its specific strenght to provide a tailored test for each and every user and application.
Expand 2 Items
Titrimetric rapid tests, acidity, VISOCOLOR®
Supplier: MACHEREY-NAGEL
The VISOCOLOR® testkits are devided into VISOCOLOR® alpha, ECO and HE. Every product range offering its specific strenght to provide a tailored test for each and every user and application.
Expand 1 Items
pH indicator, phenol red tablets and solutions, Lovibond®
Supplier: Lovibond
Indicator for pH range 6,5 to 8,4.
Expand 6 Items
NANOCOLOR® Photometric Tube Test Kit for Ethanol
Supplier: MACHEREY-NAGEL
Photometric test kit for the determination of ethanol in water samples.
Expand 1 Items
Reagents for chromium determination using Lovibond® MD photometers
Supplier: Lovibond
Test kit, Chromium hexavalent (powder pack), Range: 0,02 – 2 mg/l Cr, For unit: MD600, MD610
Expand 2 Items
Reagent set (7 parameters), VISOCOLOR® ECO
Supplier: MACHEREY-NAGEL
Reagent cases are flexible tools for all areas of water and soil analysis. The cases are ideal for testing water bodies, for fish farming and a wide variety of other applications within the area of environmental management and water monitoring.
Expand 1 Items
Test kits, photometric, Nitrate, LCK cuvette tests
Supplier: Hach
Pre-dosed reagents for maximum safety.
Expand 2 Items
QUANTOFIX® Test Strips for Semi-quantitative Determinations of pH and Nitrite in Water Analyses
Supplier: MACHEREY-NAGEL
Semi-quantitative test strips for the determination of nitrite and pH. Ideal for rapid and easy analysis of nitrite and pH directly on-site. No maintenance or calibration is required.
Expand 1 Items
Qualitative test paper peroxtesmo KM for blood traces (peroxidase)
Supplier: MACHEREY-NAGEL
This test paper allows the quick and sensitive detection of blood traces. In criminal investigations it is used as a rapid screening test.
Expand 1 Items
Reagents for manganese determination using Lovibond® MD photometers
Supplier: Lovibond
Test kit, VARIO PAN indicator solution, 0,1%, Range: 0 - 0,7 mg/L Mn, For unit: MD 600
Expand 15 Items
Test Kits, model FF-2 for freshwater aquaculture
Supplier: Hach
Maintaining good water quality is essential and this kit utilizes drop count titration and color disc methods to deliver the fast, accurate results. Allows measurement of ten critical freshwater parameters using accurate Digital Titrator titration and continuous colour disc colorimetry.
Expand 1 Items
Test strips, ascorbic acid, QUANTOFIX®
Supplier: MACHEREY-NAGEL
QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.
Expand 1 Items
Non-oxidising biocide test kits, for industrial water
Supplier: Lovibond
These non oxidising biocide test kits are based on novel colorimetric or titrimetric procedures and are designed to measure the accurate biocide levels in minutes to ensure continued system control.
Expand 2 Items
Test strips, ammonium, QUANTOFIX®
Supplier: MACHEREY-NAGEL
QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.
Expand 1 Items
Reagent for nickel determination using Lovibond® MD photometers
Supplier: Lovibond
Test kit, Nickel-51, Nickel-52 reagent test, Range: 0.02 - 1 mg/l, 0.2 - 7 mg/l Ni
Expand 1 Items
NANOCOLOR® Photometric Tube Test Kit for Organic Acids
Supplier: MACHEREY-NAGEL
Photometric test kit for the determination of organic acids in water samples.
Expand 1 Items
Lovibond® Hardness Total Drop Test Kit
Supplier: Lovibond
Lovibond® offers a wide range of single parameter Drop Test Kits forindividual test requirements. They are for use in various water testing applications including potable water, process water, industrial boilers and cooling systems, swimming sool and waste water treatment.
Expand 1 Items
Visual comparator test kit, ethylene glycol
Supplier: Hach
Ethylene glycol (anti-freeze) contamination of automotive lubricants is an indication of a cracked engine block. Glycol presence also can indicate leaks in cooling systems. This test kit model EG-1 presents a purple colour if ethylene glycol and other 1,2 glycols are present in oil or water.
Expand 1 Items
Nitrite VHR L, 500 ml
Supplier: Lovibond
Easily monitor nitrite levels in closed-loop cooling systems with this liquid reagent. Proper control of nitrite levels prevents pipework corrosion. This easy-to-use colourimetric method test can monitor high levels (up to 2,500 mg/L) of nitrite without the need to dilute samples.
Expand 1 Items
Test strips, Silver, QUANTOFIX®
Supplier: MACHEREY-NAGEL
QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.
Expand 1 Items
Test kits, tannin and lignin
Supplier: Hach
Designed to analyse tannin and lignin together and report result as mg/l tannic acid.
Expand 1 Items
NANOCOLOR® Photometric Standard Test Kit for Nitrite
Supplier: MACHEREY-NAGEL
Photometric test kit for the determination of nitrite in water samples.
Expand 1 Items
Total organic carbon (TOC) reagent sets, Test 'N Tube™
Supplier: Hach
Used for determination of Total Organic Carbon (TOC) either by low range, mid range or high range test 'N Tube' method respectively. The set includes digestion vials and reagents for 25 to 50 tests.
Expand 3 Items
Visual colour kits, alkalinity, AL-AP
Supplier: Hach
Caused by the presence of carbonates, bicarbonates, hydroxides, and other dissolved salts, alkalinity is important to food and beverage processors, boiler operators, and aquatic biologists.
Expand 1 Items
Test papers, qualitative, cobalt
Supplier: MACHEREY-NAGEL
This test paper allows the quick and easy detection of Cobalt (Co²⁺). For non-destructive testing of materials apply a drop of acid solution (50 ml hydrogen peroxide 3% + 7,5 ml O-phosphoric acid 85% + 5 ml hydrochloric acid 37 %) to the degreased surface.
Expand 1 Items
Phosphorus (Reactive) TNT reagent set
Supplier: Hach
Set used for determination of reactive phosphorus (ortho-phosphate) by the molybdovanadate Test 'N Tube™ method.