You searched for: Agarose and Acrylamide
Agarose and acrylamide are the most commonly used electrophoresis gels for their versatility with buffers and ability to generate reproducible results. Agarose typically runs horizontal tests to resolve large DNA fragments while acrylamide runs vertical separations for shorter nucleic acids. Easy to handle, the gels are chosen based on the high resolution desired and the samples. The concentration or ratio of the agarose and acrylamide will determine the overall working porosity.
VWR® Acrylamide and Bis-Acrylamide
Supplier: VWR Chemicals
An extensive line of acrylamide and bis-acrylamide pre-weighed powder blends, pre-mixed stock solutions and ready to use solutions for customised polyacrylamide gel electrophoresis of proteins and PAGE of nucleic acids.
Expand 4 Items
VWR® Acrylamide-Bis Solution (37,5:1) 30% Aqueous Solution, Ultra Pure Grade
Supplier: VWR Chemicals
Electrophoresis Gels, Acryl/Bis™, Acrylamide-Bis solution (37,5:1) 30% aqueous solution
Expand 1 Items
VWR®, Agarose I™
Supplier: VWR Chemicals
Agarose I™ is a standard melting/gelling agarose, suitable for routine nucleic acid analytical/preparative applications (250 bp to 22 kb).
Expand 5 Items
Acryl/Bis solution (30%) 29:1, ultrapure
Supplier: VWR Chemicals
Electrophoresis Gels, Acryl/Bis™, Acryl/Bis solution (30%) 29:1
Expand 1 Items
VWR® Acryl/Bis™ Acrylamine/Bis-Acrylamine
Supplier: VWR Chemicals
A 40% (w/v) solution of ultra pure acrylamide (38,96%) and bis-acrylamide (1,04%) at a final ratio of 37.5:1.
Expand 1 Items
VWR®, Agarose RA™
Supplier: VWR Chemicals
Agarose RA™ is a general application agarose that provides good resolution and is cost effective for high volume users. It was developed specifically for quick checks of PCR products, plasmids preps, screening and cloning.
Expand 4 Items
Peqlab peqGOLD, Agarose, Universal
Supplier: VWR Chemicals
High quality standard agarose for routine analysis with broad separation range (0,05 to 50 kbp). Ideal for blotting applications due to high gel strength. Free from RNases, DNases and enzyme inhibitors.
Expand 1 Items
Protein A Agarose (Endotoxin-free)
Supplier: Abcam
Reusable, Endotoxin free Protein A conjugated Agarose beads with ≥15 mg/ml binding capacity.
Expand 1 Items
GelGreen® Agarose LE
Supplier: Biotium
Ultrapure molecular biology grade agarose pre-coated with GelGreen® Nucleic acid gel stain for convenient and safer preparation of precast gels.
Expand 1 Items
Agarose LE, ultra-pure molecular bology grade
Supplier: Biotium
High performance agarose for nucleic acid electrophoresis (analytical or preparative) and blotting. Validated for use with GelRed®, GelGreen®, and DNAzure® gel stains.
Expand 3 Items
Agarose I, Pierce™
Supplier: Thermo Fisher Scientific
Agarose I (molecular biology grade) is a highly purified and carefully blended formulation that provides uniform lot-to-lot consistency for preparation of electrophoresis gels.
Expand 2 Items
Melt & Pour UltraSpec-Agarose™
Supplier: EDVOTEK
0.8% UltraSpec-Agarose™ prepared with TAE buffer. Simply melt, cool and pour.
Expand 2 Items
UltraSpec-Agarose™, DNA electrophoresis grade
Supplier: EDVOTEK
Electrophoresis Gels, UltraSpec-Agarose™
Expand 3 Items
Agarose II, low melting point, Pierce™
Supplier: Thermo Fisher Scientific
Agarose II (low melt) is a highly purified and carefully blended formulation that provides uniform lot-to-lot consistency for preparation of electrophoresis gels that require a lower melting temperature.
Expand 1 Items
Acrylamide/Bis-Acrylamide
Supplier: Thermo Fisher Scientific
Premix of acrylamide with the common cross-linking reagent of final ratio 29:1.
Expand 2 Items
Agarose, Molecular Biology Grade, Ultrapure
Supplier: Thermo Fisher Scientific
This agarose is a granular, free-flowing powder.
Expand 4 Items
Agarose, low gelling temperature
Supplier: Thermo Fisher Scientific
Agarose is useful in separation of nucleic acids electrophoretically because agarose gels have larger pore sizes than cross linked acrylamide gels at low concentrations and in chromatographic separations by either beading the agarose or cross-linking it. Agarose gels are also used in immunoelectrophoresis (IEP) and double-diffusion Ouchterlony plates to demonstrate antibody-antigen reactions.
Expand 3 Items
Acrylamide/ Bis-Acrylamide
Supplier: G-Biosciences
Acrylamide (electrophoresis grade) is supplied as a powder or a 40% solution in ultrapure water. Bisacrylamide (Bis (N,N’-methylenebisacrylamide)) (electrophoresis grade) is supplied as a powder or a 2% solution in ultrapure water.
Expand 8 Items
Agarose, electrophoresis grade, MP Biomedicals
Supplier: MP Biomedicals
Agarose is a purified linear galactan hydrocolloid isolated from agar or agar-bearing marine algae.
Expand 2 Items
Acrylamide/bis premix, 29:1, MP Biomedicals
Supplier: MP Biomedicals
Premix of ultra pure acrylamide with the cross-linking reagent N,N'-methylene-bis-acrylamide, final ratio 29:1.
Expand 1 Items
Acrylamide, electrophoresis grade, MP Biomedicals
Supplier: MP Biomedicals
Acrylamide is a monomer used in a variety of synthetic processes to form polymers and copolymers. It polymerizes in the presence of free radicals in aqueous solutions. It is usually used to prepare polyacrylamide gels for electrophoresis separation of biomolecules.
Expand 2 Items
Agarose LE, molecular biology grade, Axygen®
Supplier: Corning
Axygen® Agarose Low Electroendosmosis (LE) is a high quality molecular biology grade agarose suitable for analytical and preparative electrophoresis of nucleic acids.
Expand 2 Items
Agarose, immunodiffusion grade, MP Biomedicals
Supplier: MP Biomedicals
Agarose is the most popular medium for immunoelectrophoresis because of the large pore size for rapid diffusion, and for low background staining by Coomassie Blue G stain. The low EEO and high gel strength is specifically selected and tested for immunoelectrophoresis and immunodiffusion.
Expand 2 Items
Agarose, genetic technology grade, MP Biomedicals
Supplier: MP Biomedicals
Agarose is a purified linear galactan hydrocolloid isolated from agar or agar-bearing marine algae.
Expand 3 Items
Acrylamide/Bis-Acrylamide, LIQUI-GEL™ solution 40% (19:1), MP Biomedicals
Supplier: MP Biomedicals
Liqui-Gel is a 40% (w/v) solution of ultra pure acrylamide and bis-acrylamide in deionised water. The gel is formed by the polymerisation of the acrylamide monomer with a co-monomer often N,N'-Methylene-bis-acrylamide, which acts as a cross-linking agent, in the presence of free radicals or a photochemical initiator.