You searched for: Cleanroom Wipes

Supplier: CONTEC

Absorbent, non woven cellulose/polyester wipes, feature enhanced sorbency while being economical due to their light weight.

Supplier: CONTEC

These absorbent non abrasive wipes consist of long staple cellulosic fibres which are wet laid in a paper making process to form an extremely clean sheet.

Supplier: CONTEC

Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment. Made from 100% textured polyester no-run knit.

Supplier: CONTEC

Non woven wipes pre-saturated with acetone or isopropanol.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges and increased sorbency.

Supplier: CONTEC

SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester presaturated with IPA and DI water.

Supplier: CONTEC

This microfiber wipe is made of 100% polyester microfibre yarn knitted into a thermally bonded PP substrate.

Supplier: CONTEC

Amplitude™ Lambda™ wipes are made from hydroentangled blend of 58% cellulose and 42% polyester. This hydroentangled fabric provides low levels of particles and extractables.

Supplier: CONTEC

Pre-saturated knitted polyester wipes made with Polynit Heatseal material. The wipes are pre-saturated with 70% IPA and 30% DI Water. They are therefore ideal for cleanroom applications, surface preparation and critical manufacturing processes.

Supplier: CONTEC

100% interlock knit lightweight polyester wipes with sealed edges.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges.

Supplier: CONTEC

Hydroentangled split microfibre wipes pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Recycled 100% knitted polyester cleanroom wipes offer a sustainable solution for cleanroom environments, without jeopardising quality or performance. Soft textured wipes clean surfaces without scratching, while offering low levels of particles and fibres, abrasion and chemical resistance, and good solvent compatibility.

Supplier: CONTEC

100% continuous filament polyester wipe with sealed border and Particle Attraction Technology (PAT).

Supplier: CONTEC

These wipes are manufactured from high quality 100% knitted polyester fabric with sealed edges. The polyester fabric offers the widest range of solvent compatibility. Ideal for use in product contact areas.

Supplier: CONTEC

Presaturated wipes can offer many benefits over bottled alcohol and dry wipes for cleanroom use. Contec’s sterile SATWIPES Theta with 70% denatured ethanol consist of a perforated roll of presaturated wipes which are dispensed through a convenient centre pull canister.

Supplier: CONTEC

These wipes consist of 50% polyester and 50% rayon (non woven) that is hydraulically entangled creating a soft, durable, and clean wipe. The saturation of 70% alcohol and 30% deionized water provides a safe and mild cleaning solution.

Supplier: CONTEC

This non woven, meltblown PP wipe is pre-saturated with 91% isopropanol and 9% deionised water.

Supplier: CONTEC

Presaturated with IPA/DI water.

Supplier: CONTEC

These hydrophilic polyurethane foam wipes are engineered for use in cleanroom and other critical applications. They combine high absorbency with extremely low levels of extractable residue and particles.

Supplier: CONTEC

These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water.

Supplier: CONTEC

100% polyester wipe, blend of standard and microfibre filaments with sealed edges.

Supplier: CONTEC

The Polynit-Z wipe features conductive yarns within the polyester interlock knit. It is a very clean static dissipative wipe that is well suited for applications that are sensitive to electrostatic discharge. The average surface resistivity is 3,5×10¹⁰
ohms/sq.

Supplier: CONTEC

Thermally bonded non woven PP and cellulose quilted wipes, two layers of PP trap the cellulose core, which allow this material to be very absorbent, with a high level of cleanliness.

Supplier: CONTEC

These wipes are made from a 100% no-run interlock knit polyester construction with knife cut edges.

Supplier: CONTEC

The Polywipe-C Heatseal wipe is made from filament polyester and pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

The Amplitude™ Sigma™ Plus wipes are strong and durable, compatible with most solvents, and have outstanding sorbency.

Supplier: CONTEC

The Twill Jean wipe is a 100% cotton fabric, woven in a 2×1 twill construction. It is very absorbent and has high thermal stability for high temperature applications.

Supplier: CONTEC

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: CONTEC

Anticon® MicroQuilt combines the cleanliness and sorbent capacity of Quiltec® with the microfibre particle pick-up ability of Anticon® Gold Sorb. This hybrid creates the most sorbent, cleanest wipe Contec offers.