You searched for: Cleanroom Wipes

Supplier: CONTEC

These microfibre wipes (80% polyester/20% nylon) are made with fabric densely knitted by continuous microdenier filament. The wipes are laser cut, which seals the fibers at the edges. The unique structure of microfibre improves the surface contact, and provides more effective cleaning.

Supplier: CONTEC

These wipes consist of 50% polyester and 50% rayon (non woven) that is hydraulically entangled creating a soft, durable, and clean wipe. The saturation of 70% alcohol and 30% deionized water provides a safe and mild cleaning solution.

Supplier: CONTEC

These absorbent non abrasive wipes consist of long staple cellulosic fibres which are wet laid in a paper making process to form an extremely clean sheet.

Supplier: CONTEC

Presaturated with IPA/DI water.

Supplier: CONTEC

The Polynit-Z wipe features conductive yarns within the polyester interlock knit. It is a very clean static dissipative wipe that is well suited for applications that are sensitive to electrostatic discharge. The average surface resistivity is 3,5×10¹⁰
ohms/sq.

Supplier: CONTEC

The lightweight Polywipe-C Heatseal wipe consists of a fabric knitted from filament polyester and features a textured surface for effective cleaning. The wipe is laser-cut, which seals the fibers at the edges.

Supplier: CONTEC

Pre-saturated knitted polyester wipes made with Polynit Heatseal material. The wipes are pre-saturated with 70% IPA and 30% DI Water. They are therefore ideal for cleanroom applications, surface preparation and critical manufacturing processes.

Supplier: CONTEC

These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water.

Supplier: CONTEC

100% polyester wipe, blend of standard and microfibre filaments with sealed edges.

Supplier: CONTEC

Amplitude™ Lambda™ wipes are made from hydroentangled blend of 58% cellulose and 42% polyester. This hydroentangled fabric provides low levels of particles and extractables.

Supplier: CONTEC

100% nonwoven polyester wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Thermally bonded non woven PP and cellulose quilted wipes, two layers of PP trap the cellulose core, which allow this material to be very absorbent, with a high level of cleanliness.

Supplier: CONTEC

Anticon® MicroQuilt combines the cleanliness and sorbent capacity of Quiltec® with the microfibre particle pick-up ability of Anticon® Gold Sorb. This hybrid creates the most sorbent, cleanest wipe Contec offers.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

These low endotoxin wipes are made from 100% knitted polyester and pre-saturated with a blend of 70% USP-Grade IPA and 30% water for injection (WFI).

Supplier: CONTEC

These wipes are made from a 100% no-run interlock knit polyester construction with knife cut edges.

Supplier: PFENNIG REINIGUNGSTECHNIK

Clino® one way clean surfaces in semiconductors and pharma industries.

Supplier: CONTEC

The Polywipe-C Heatseal wipe is made from filament polyester and pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: CONTEC

ProChlor is a sporicide achieving a 100% kill against spores in under one minute. It is validated for sporicidal transfer disinfection in practice-mimicking conditions, achieving a log 5 kill on syringe paper samples and complete kill on plastic syringe samples in one minute.

Supplier: CONTEC

The Amplitude™ Sigma™ Plus wipes are strong and durable, compatible with most solvents, and have outstanding sorbency.

Supplier: CONTEC

Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment. Made from 100% textured polyester no-run knit.

Supplier: CONTEC

Non woven wipes pre-saturated with acetone or isopropanol.

Supplier: CONTEC

This microfiber wipe is made of 100% polyester microfibre yarn knitted into a thermally bonded PP substrate.

Supplier: CONTEC

Recycled 100% knitted polyester cleanroom wipes offer a sustainable solution for cleanroom environments, without jeopardising quality or performance. Soft textured wipes clean surfaces without scratching, while offering low levels of particles and fibres, abrasion and chemical resistance, and good solvent compatibility.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges and increased sorbency.

Supplier: CONTEC

SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester presaturated with IPA and DI water.

Supplier: CONTEC

100% interlock knit lightweight polyester wipes with sealed edges.

Supplier: CONTEC

Slide 'n seal bag is a resealable bag that allows easy dispensing of PROSAT® polywipe-C pre-saturated wipes. The plastic piece glides across the top of the bag ensuring a tight seal every time the bag is closed. No adhesives are used to keep the bag closed.

Supplier: CONTEC

These wipes are manufactured from high quality 100% knitted polyester fabric with sealed edges. The polyester fabric offers the widest range of solvent compatibility. Ideal for use in product contact areas.