Supplier: Merck

Fluid sampling kit for sampling turbine fuels, water or other liquids through Millipore contamination analysis monitors.

Supplier: BURKLE

ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask.

Supplier: NASCO FORT ATKINSON

The Sludge Judge line of collection tools are dependable and long-lasting.

Supplier: BURKLE

Material: V4A stainless steel (1.4404). Sampler for thin to viscous liquids.

Supplier: BURKLE

The scratcher has particularly been designed for sampling cohesive or caked substances.

Supplier: GERBER FUNKE

It is made up of stainless steel with valve for automatic drainage.

Supplier: Hach

Sampler dipper with PP cups for sampling from tanks, vats, streams, ponds, lakes.

Supplier: BURKLE

Sampler for free flowing bulk goods up to approx. 10 mm diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks.

Supplier: VWR Collection

White PTFE ladle.

Supplier: BURKLE

Mini immersion cylinder for sampling liquids in narrow places where access is difficult.

Supplier: VWR Collection

When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.

Supplier: BURKLE

To make a sampling procedure reproducible, it should always be carried out under the same conditions. For this purpose, the depth stop for samplers is a helpful accessory.

Supplier: BURKLE

Suction samplers for viscous media such as paste, sludge, cream, or oil.

Supplier: BURKLE

ProfiSampler, the vacuum-operated sample collector for robust industrial use.

Supplier: BURKLE

This disposable TargetDispo sampler is to take a target point sample at a position in the sample material that has previously been precisely determined. Sampler is closed while it pierces into the powder or granulate, when it reaches the sample removal point it is opened and then closed again, in this way a precise target-point sample is obtained.

Supplier: Hach

Portable water sampler using pressure-vacuum technology. Combines small dimensions by offering the 24×1 l bottle option for glass as well as plastic bottles or 25 l composite PE bottle. Enables the option of 24×1 l or 1×25 l PE sample bottles, respectively 24×1 l or 1×20 l glass sample bottles, in combination with an active cooled sampler base. This is especially interesting for sampling in accordance to local regulation (24 × hourly mixed sample/daily mixed sample). Cleaning efforts are reduced to a minimum due to the new designed vat sample distributor and the standard round sample bottles. The sampler offers two cooling options for ensuring a sample storage at 4 °C: passive with ice packs or active with an integrated cooling machine including autarkic temperature control. The pressure-vacuum sampler is ISO 5667 compliant. To avoid cross contamination, the system is purged before and after each sample is taken. The compact, weatherproof housing made of PE plastic ensures failure-free operation over many years and often changing installation locations. Even in extremely corrosive applications. All programming features of stationary sampler products are available.

Supplier: BURKLE

Made of ultra-pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Fits all vats and barrels with openings of at least 32 mm Ø.

Supplier: BURKLE

With EasySampler, it is possible to take multiple samples from bulk goods, quickly and easily.

Supplier: BURKLE

For sampling bulk goods, cross-sectional samples can be taken from different sample depths. Suitable for use with a range of sample substrates from fine powder to coarse grain. Multi sampler has three or five separate chambers for taking samples at multiple depths in one action. Uno sampler has one chamber for taking a sample at one specified depth. All layer sampler has no chambers, three or five inlets and this allows one sample to be taken at multiple depths. Jumbo sampler has no chambers and three, five or seven inlets; with a 50 mm tube diameter this is ideal for larger grain sizes and quantities.

Supplier: VWR Collection

Cylindrical probe for aseptic sampling of ice cream and similar products. The probe is completed with a special PYREX® test tube for transport of the sample to the laboratory for the food industry, also ice cream producers and health authorities.

Supplier: BURKLE

Stainless steel sampler for powders. The conical inlet allows for collection of different sample sizes, up to approximately 50 ml. Constructed without edges, grooves or crevices for easy cleaning. The sample is collected directly into the sampling bag which is held in place with the included clamp. StickProof borehole diameter 25 mm; chamber length 120 mm. Sampling bags: 170×120 mm for 400 ml.

Supplier: BURKLE

Made of stainless steel or PP, transparent, sample bottles made of PE. The QuickPicker is appropriate when bulk goods are withdrawn directly from sacks, bags or open containers. The sample is filled directly into sample bottles. Sampling depth 300 mm, Ø 25 mm, length 500 mm, 75 ml volume.

Supplier: BURKLE

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net) are attached to the telescopic rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses. Sampling depths down to 6 m can be reached with the adjustable telescopic aluminium rod.

Supplier: BURKLE

Conical hand drill with sharp cutting edges and a solid handle made from stainless steel V2A (1.4301)/AISI 304.

Supplier: BURKLE

Precise liquid samples can be taken with this immersion cylinder. When the target has been reached, open the cover and pour out the sample.

Supplier: Merck

Several EPA and ASTM methods require a polyurethane foam (PUF) cartridge for monitoring semi-volatiles in stack, ambient, indoor, and workplace atmospheres.

Supplier: BURKLE

The Powder Sampler Mini is a stainless steel sampler for small quantities. The sampler precisely collects 0,01, 0,05, and 0,1 ml sample volumes, depending on the version.

Supplier: BURKLE

Novartos Uno sampler with two or three sample chambers, for one sample zone.

Supplier: BURKLE

Disposable sampler for the highest standard in sampling unlike conventional reusable samplers, disposable samplers do not need to be cleaned after use. Simple disposable sampler for taking samples of low viscosity media. Cleaning reusable samplers is a demanding and often complicated task with greasy toxic substances. Sometimes the task is even impossible. Cross contamination is completely eliminated. It has two opening sizes (2,5/5,5 mm) for different viscosities.

Supplier: BURKLE

For taking bacteriological samples from the surfaces of dead animals in slaughterhouses and in butchers‘ shops. (cattle, pigs, sheep, goats and horses). The BeefSteaker is used to cut out a 25 mm round sample from the animal‘s skin. The stainless steel (1,4404) cutter allows the sample to be cut out easily.