Supplier: THERMO NATIONAL SCIENTIFIC

These headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. Use Tin plate seals with magnetic pick autosamplers. Pressure release seals are designed to open when internal pressures exceed 3,0 ±0,5 bar, protecting equipment during analysis of highly volatile samples.

Supplier: THERMO NATIONAL SCIENTIFIC

These sample storage unassembled convenience kits save time during sample preparation.

Supplier: Restek

Vial insert, 0,25 ml, Glass, Non sterile, Cap included: No

Supplier: MURRAY S

These clear scintillation vials with screw cap are made from low potassium glass.

Supplier: PerkinElmer

Chromatography vial, Headspace screw neck, 20,00 ml, Glass, Clear, Ø×H: 23×75,5 mm, Rounded bottom (HS bottom), Non sterile, Cap included: No

Supplier: LA PHA PACK

These vials are for use on instruments from the following manufacturers: Beckman, CTC, Gilson, Knauer, Shimadzu, Spark, Varian, VWR®/Hitachi, more.

Supplier: DWK Life Sciences

Insert is made of durable polypropylene (PP) and is designed for vials with a step.

Supplier: Restek

Chromatography vial, 2,00 ml, Glass, Amber, Ø×H: 12×32 mm, Flat bottom, Non sterile, Cap included: No, Cap size: 12 mm

Supplier: DELTALAB

Single use vials made of high density polyethylene to minimise solvent losses.

Supplier: SAVILLEX

PFA vials with round or conical interior.

Supplier: BOETTGER PAUL

Optically clear vials with parallel surfaces, free of dust or particles.

Supplier: METROHM

Sample vials made of quartz for Combustion IC.

Supplier: DELTALAB

These flat bottom screw thread vials are made of ultra clear borosilicate glass.

Supplier: DWK Life Sciences

These vials made of PP uses either aluminum crimp seals or plastic snap cap closures, which eliminate the need for crimping and decapping tools, and provide a larger target area.

Supplier: MURRAY S

Vials made from neutral glass with snap-on lid. Designed for a wide variety of uses in the laboratory, production, more.

Supplier: MURRAY S

Vials made from neutral glass with PP screw cap. Designed for a wide variety of uses in the laboratory, production, more.

Supplier: LA PHA PACK

Screw neck vials in clear or amber glass, hydrolytic class 1, for sample storage. A broad range of closed top screw caps are available with different types of septa.

Supplier: PerkinElmer

Manufactured from Type I borosilicate glass, which meets all USP, JP, and EP Pharmacopeia requirements. These vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments.

Supplier: DWK Life Sciences

Screw threaded sample vials made from soda-lime glass, with white PE caps unattached.

Supplier: METROHM

General use vial, 6,00 ml, Glass, Clear, Ø×H: 22×38 mm, Non sterile, Cap included: No

Supplier: MURRAY S

These vials without closure are made from neutral glass.

Supplier: STERILIN

Vial insert, 6,00 ml, PP, Ø×H: 14,5×58 mm, Flat bottom, Non sterile, Cap included: Yes

Supplier: PerkinElmer

This screw top waste and wash vial is manufactured from type I borosilicate glass.

Supplier: MURRAY S

Vials made from neutral glass with PE plug stoppers. Suitable for a wide variety of uses in the laboratory, production, more.

Supplier: SEMADENI

These scintillation vials are made of high quality material and good solvent resistance with good stability.

Supplier: Restek

Precleaned volatile organic analyte sampling vials with open-top caps.

Supplier: BIOCISION

TruCool® leak-proof cryogenic vials feature a screw cap with a thermally-fused gasket to ensure a tight seal. The gasket is a co-molded thermoplastic elastomer (TPE) layer, which prevents leaking, slipping and risk of contamination. The gasket is 95 kPa certified to provide a leak-proof seal. These vials are sterile and individually barcoded with a unique identifier which can be read with common barcode readers. Ideal for use in CoolRack® CF cryogenic vial modules and CoolCell® alcohol-free cell freezing containers. Recommended for use in vapor phase LN₂ only.

Supplier: LA PHA PACK

Standard glass or plastic vials for GC and HPLC, micro-inserts, closures and kits. Can be used universally on almost all autosamplers, preferred type of vial for Waters and Agilent.

Supplier: DELTALAB

Tubes and caps made of autoclavable PP. Designed for the storage of biological material at temperatures as low as –196 °C (only in the gas state if stored in liquid nitrogen).

Supplier: ZINNSER ANALYTIC

Scintillation vial, Screw neck, external thread, 20,00 ml, HDPE, Ø×H: 27×60 mm, Flat bottom, Non sterile, Cap included: Yes