You searched for: Disposable Garments

Supplier: DuPont

This overall is made of ProShield® 60 garments, it comprise a microporous film on a polypropylene nonwoven fabric and combine good particle protection with high liquid repellency. They help provide a barrier against non-hazardous dry particles down to one micron in size, are repellent to liquids. This material offers limited comfort: it is permeable to moisture vapour only and it is not air permeable.

Supplier: DuPont

Specially designed for use with Tyvek® apparel, these sleeve protectors can help offer enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® sleeves are made from flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort.

Supplier: Nitritex

These covers are made of spunbonded PP with proprietary elastomer coating. The conductive tape is constructed from polyester filament yarn (96%) with conductive nylon carbon filament yarn (4%). The conductivity is consistently below 35 Megohms.

Supplier: Nitritex

These disposable lab coats are made from CleanTough™ fabric which is spunbonded non-woven PP laminated with a film of PE. The fabric provides protection against fine sprays and particles.

Supplier: DuPont

Air-fed coverall with attached non-dissipative under gloves and over boot assembly, consisting of integrated dissipative inner boots attached to dissipative outer boots.

Supplier: DuPont

These jackets are made from Tyvek®, a flash spun high density PE fabric. Tyvek® is permeable to air and water vapour, but repels aerosols and water-based liquids. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: DuPont

These overalls are mainly composed of flash spun polyethylene, providing an ideal balance of protection, durability and comfort. Thanks to their non woven structure, they are permeable to both air and water vapour, yet repel water-based liquids and aerosols. The overalls also offer an excellent barrier against fine particles and fibres.

Supplier: DuPont

The Tyvek® 400 Dual garment combines Tyvek® on the front with a non woven SMS panel on the back. The Tyvek® front is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres down to 1 micron in size.

Supplier: DuPont

These hooded protective coveralls are made from a non halogenated, flame-retardant polypropylene SMS non woven fabric providing limited protection against flame spread (index 1) in addition to protection against particles and limited liquid splashes or sprays of water-based liquids. They must always be worn on top of a primary FR protection garment, such as Nomex®.

Supplier: DuPont

These garments are made of a proprietary DuPont micro-perforated non woven polyethylene fabric. ProShield® 4 Practik overalls are comfortable because the material is micro-perforated to allow the unrestricted passage of air and water vapour.

Supplier: DuPont

These garments are made of Tyvek®, a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µ in size).

Supplier: DuPont

Hooded coveralls feature Tyvek® fabric on the front of the garment and breathable SMS on the back. Tyvek® under gloves and Tyvek® socks are attached.

Supplier: DuPont

This hood is not clean-processed and not sterilised made of Tyvek®, a flash spun high density polyethylene. The fabric is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size) and is ultra-low linting.

Supplier: DuPont

These hooded coveralls, model IC193BWH TS, are made of Tyvek®, a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: DuPont

This robust yet lightweight garment benefits from the use of a specific 'impervious technology' to achieve an effective barrier against many low-concentrated water-based inorganic chemicals (even under pressure) and small-sized hazardous particulates, as well as oil repellences.

Supplier: DuPont

The apron is made of Tyvek®, a fabric composed of flash spun high density PE. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size). Specially designed for use with Tyvek® apparel, this apron offers enhanced protection for body parts that are more exposed to hazardous substances.

Supplier: DuPont

Air-Fed coverall with attached non-dssipative undergloves and integrated dissipative socks.

Supplier: DuPont

Accessories for Tychem® 6000 AL Ventilated Coveralls

Supplier: DESCO

Disposable conductive surgical style Booties are 'one size fits all' with elastic opening.

Supplier: DuPont

These collared overalls feature Tyvek® at the front and a large breathable spunbound polypropylene back panel. Ideal for use in environments where comfort is important and exposure risk is limited to the front.

Supplier: Nitritex

Lightweight beard cover made of soft non woven PP. Suitable for use in a variety of environments.

Supplier: DuPont

These hooded overalls are made of Easysafe fabric, an optimised non woven PE fabric from DuPont. It is softer and with a more open structure than Tyvek®. It is therefore less protective than Tyvek® (L1431N), but offers adequate Type 5 and 6 barrier protection and remains both air and moisture vapour permeable.

Supplier: DuPont

These caps are made of Tyvek® which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash.

Supplier: VWR Collection

These masks are made up of polypropylene.

Supplier: HUBEI ORIENT INTL TRADING

Disposable bouffant caps made from non woven PP. Ideal for use in non hazardous environments.

Supplier: HUBEI ORIENT INTL TRADING

These non woven shoe covers are made of PP with a skid-resistant CPE coating on the sole.

Supplier: VWR Collection

SMS lab coats are manufactured from a latex-free, multi-layer spunbonded-melt-blown-spunbonded (SMS) fabric that offers high tensile strength, while remaining soft, comfortable and breathable.

Supplier: VWR Collection

These disposable visitor coats, with collar, are made from non woven, SPP fabric.

Supplier: VWR Collection

These disposable coats, with collar, are made from non woven, spunbonded polypropylene (SPP) fabric, which protects against dirt, grime, and certain dry particulates, in non hazardous environments.

Supplier: VWR Collection

Disposable aprons made of PE film.