You searched for: Standards

Supplier: Restek

Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.

Supplier: CUSTOM MADE CHEMICALS LAB

500 ml solution contains 50 mg/L Al, As, Ba,Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Sr, Zn and 500 mg/L K in 5% HNO₃.

Supplier: Restek

Standards are packaged in methanol in an ampoule.

Supplier: LGC Standards PROMOCHEM

NIST-1646A, estuarine sediment - metals, : N/A

Supplier: Restek

Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

Supplier: Restek

The biodiesel component is methyl soyate.

Supplier: LGC Standards PROMOCHEM

This reference standards are intended to use in the determination of trace elements in fresh water. The solution contains nitric acid at a volume fraction of approximately 2%, equivalent to an amount of substance concentration (molarity) of approximately 0,32 mol/l and also it simulates the elemental composition of fresh water.

Supplier: LGC Standards PROMOCHEM

This Reference material is intended for daily use in conjunction with measurement of elements in wastewaters. The water solution contains 13 elements with concentrations traceable to ultra pure metals or stoichiometrically well-defined substances.

Supplier: LGC Standards PROMOCHEM

This reference standards are intended for use in the calibration of instruments and the evaluation of methods used in the determination of total sulphur in fuel oils and materials of similar matrix.

Supplier: LGC Standards PROMOCHEM

Hard drinking water UK low level metals, : N/A

Supplier: VARIAN

500 ml solution contains 5 mg/l Al, As, Ba,Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Sr, Zn and 50 mg/l K in 5 % HNO3 + tr HF.

Supplier: Endress+Hauser

Precision solution referred to SRM of NIST.

Supplier: LGC Standards PROMOCHEM

Acid number reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).

Supplier: LGC Standards PROMOCHEM

This standard reference material is intended for use in the determination of constituent elements in clay and material of similar matrix. Powdered clay was air-dried, ball-milled and blended to ensure homogeneity.

Supplier: PerkinElmer

Perkalloy, three 50,8 mm pieces (596 °C)

Supplier: CPACHEM

2×10 ml Potassium dichromate solution for absorbance control 235 - 350 nm and 6×10 ml

Supplier: CUSTOM MADE CHEMICALS LAB

16 components: Ag 10 mg/l, Al 100 mg/l, As 100 mg/l, Ba 50 mg/l, Be 5 mg/l, Cd 5 mg/l, Co 50 mg/l, Cr 20 mg/l, Cu 50 mg/l, Fe 20 mg/l, Mn 20 mg/l, Ni 50 mg/l, Pb 100 mg/l, Sb 100 mg/l, Se 100 mg/l, Tl 100 mg/l in 5% HNO₃.

Supplier: LGC Standards PROMOCHEM

These are intended primarily for the evaluation and calibration of methods for analysis of cements and materials of similar matrix.

Supplier: CUSTOM MADE CHEMICALS LAB

Total acid number TAN 17034, 2 mg KOH/g

Supplier: LGC Standards PROMOCHEM

White cabbage (Trace elements), : N/A

Supplier: LGC Standards PROMOCHEM

This reference standard is intended primarily for use in the calibration of apparatus and the evaluation of techniques employed in the analysis of calcined petroleum coke and other materials with a similar matrix.

Supplier: LGC Standards PROMOCHEM

A unit contains approximately 5,5 gm soya-maize oil blend in 10 ml amber ampoule.

Supplier: SI Analytics

ORP electrode solutions are used as cleaning solutions for combination electrodes and reference electrodes.

Supplier: Restek

ASTM Method D6730-01 is specifically designed for the determination of the individual hydrocarbons present in spark ignition fuels, as well as fuel blends containing oxygenates such as methyl tert-butyl ether, ethyl tert-butyl ether, tert-butanol, ethanol, etc.

Supplier: Restek

This mixture can be used for quantification (AOCS method CE 1a–13) and approximate the compositions of oils.

Supplier: Restek

EPA method 8310 PAH mixturecontain 18 components.

Supplier: LGC Standards PROMOCHEM

These reference materials are intended for use in accordance with ASTM D2500 for the determination of the cloud point of petroleum products. The cloud point of a petroleum product is an index of the lowest temperature of their utility for certain applications.

Supplier: Restek

The european pharmacopoeia/ICH Class 2 mix B, revised consists of 10 components, they are acetonitrile (410 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), N,N-dimethylacetamide (1,090 μg/ml), 1,4-dioxane (380 μg/ml), 2-hexanone (50 μg/ml), methanol (3,000 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml) and tetralin (100 μg/ml).

Supplier: CARGILLE

Refractive index liquids have a broad range of applications in diversified fields.

Supplier: CARGILLE

Refractive index liquids have a broad range of applications in diversified fields.