Du søkte etter: Electrophoresis Gels

Supplier: VWR Chemicals

Electrophoresis Gels, Acryl/Bis™, Acrylamide-​Bis solution (37,5:1) 30% aqueous solution

Supplier: VWR Chemicals

Electrophoresis Gels, Acryl/Bis™, Acryl/​Bis solution (30%) 29:1

Supplier: VWR Chemicals

An extensive line of acrylamide and bis-acrylamide pre-weighed powder blends, pre-mixed stock solutions and ready to use solutions for customised polyacrylamide gel electrophoresis of proteins and PAGE of nucleic acids.

Supplier: VWR Chemicals

A 40% (w/v) solution of ultra pure acrylamide (38,96%) and bis-acrylamide (1,04%) at a final ratio of 37.5:1.

Supplier: VWR Chemicals

High quality standard agarose for routine analysis with broad separation range (0,05 to 50 kbp). Ideal for blotting applications due to high gel strength. Free from RNases, DNases and enzyme inhibitors.

Supplier: VWR Chemicals

Agarose I™ is a standard melting/gelling agarose, suitable for routine nucleic acid analytical/preparative applications (250 bp to 22 kb).

Supplier: VWR Chemicals

Agarose RA™ is a general application agarose that provides good resolution and is cost effective for high volume users. It was developed specifically for quick checks of PCR products, plasmids preps, screening and cloning.

Supplier: Biotium

Ultrapure molecular biology grade agarose pre-coated with GelGreen® Nucleic acid gel stain for convenient and safer preparation of precast gels.

Supplier: Biotium

High performance agarose for nucleic acid electrophoresis (analytical or preparative) and blotting. Validated for use with GelRed®, GelGreen®, and DNAzure® gel stains.

Supplier: Abcam

Reusable, Endotoxin free Protein A conjugated Agarose beads with ≥15 mg/ml binding capacity.

Supplier: Thermo Fisher Scientific

Agarose II (low melt) is a highly purified and carefully blended formulation that provides uniform lot-to-lot consistency for preparation of electrophoresis gels that require a lower melting temperature.

Supplier: EDVOTEK

Electrophoresis Gels, UltraSpec-Agarose™

Supplier: EDVOTEK

0.8% UltraSpec-Agarose™ prepared with TAE buffer. Simply melt, cool and pour.

Supplier: Thermo Fisher Scientific

Agarose I (molecular biology grade) is a highly purified and carefully blended formulation that provides uniform lot-to-lot consistency for preparation of electrophoresis gels.

Supplier: G-Biosciences

This gel drying solution effectively and evenly dries protein electrophoresis gels by the mechanism of passive evaporation and is suitable for permanent gel storage and densitometry.

Supplier: Thermo Fisher Scientific

This agarose is a granular, free-flowing powder.

Supplier: G-Biosciences

Acrylamide (electrophoresis grade) is supplied as a powder or a 40% solution in ultrapure water. Bisacrylamide (Bis (N,N’-methylenebisacrylamide)) (electrophoresis grade) is supplied as a powder or a 2% solution in ultrapure water.

Supplier: Thermo Fisher Scientific

Premix of acrylamide with the common cross-linking reagent of final ratio 29:1.

Supplier: Thermo Fisher Scientific

Agarose is useful in separation of nucleic acids electrophoretically because agarose gels have larger pore sizes than cross linked acrylamide gels at low concentrations and in chromatographic separations by either beading the agarose or cross-linking it. Agarose gels are also used in immunoelectrophoresis (IEP) and double-diffusion Ouchterlony plates to demonstrate antibody-antigen reactions.

Supplier: MP Biomedicals

Acrylamide is a monomer used in a variety of synthetic processes to form polymers and copolymers. It polymerizes in the presence of free radicals in aqueous solutions. It is usually used to prepare polyacrylamide gels for electrophoresis separation of biomolecules.

Supplier: Genscript

GenScript's Bis-Tris gels are high-performing polyacrylamide gels designed to separate a wide range of protein sizes by electrophoresis. The gels are cast in a neutral pH buffer that minimises polyacrylamide hydrolysis and increases gel stability. Furthermore, the neutral pH which minimises protein modification when compared to Tris-glycine gels.

Supplier: MP Biomedicals

Liqui-Gel is a 40% (w/v) solution of ultra pure acrylamide and bis-acrylamide in deionised water. The gel is formed by the polymerisation of the acrylamide monomer with a co-monomer often N,N'-Methylene-bis-acrylamide, which acts as a cross-linking agent, in the presence of free radicals or a photochemical initiator.

Supplier: MP Biomedicals

Agarose is the most popular medium for immunoelectrophoresis because of the large pore size for rapid diffusion, and for low background staining by Coomassie Blue G stain. The low EEO and high gel strength is specifically selected and tested for immunoelectrophoresis and immunodiffusion.

Supplier: MP Biomedicals

Agarose is a purified linear galactan hydrocolloid isolated from agar or agar-bearing marine algae.

Supplier: MP Biomedicals

Premix of ultra pure acrylamide with the cross-linking reagent N,N'-methylene-bis-acrylamide, final ratio 29:1.

Supplier: MP Biomedicals

Agarose is a purified linear galactan hydrocolloid isolated from agar or agar-bearing marine algae.

Supplier: Corning

Axygen® Agarose Low Electroendosmosis (LE) is a high quality molecular biology grade agarose suitable for analytical and preparative electrophoresis of nucleic acids.

Supplier: EMBITEC

RunOne™ precast gels do not require a specific gel apparatus but are optimised for use with the RunOne™ Electrophoresis System. A choice of 100, 104 or 108 well formats make these gels convenient for all screening applications.

Supplier: Cytiva

DIGE gel is a 12,5% precast polyacrylamide gel in a low fluorescent glass cassette for second dimension 2-D electrophoresis and specially developed for 2-D DIGE analysis. DIGE gel and DIGE buffer kit are tools to increase the quality, reproducibility, and convenience of 2-D DIGE using Ettan™ DIGE system.

Supplier: Cytiva

Immobiline™ DryStrip gels (IPG strips) are used for isoelectric focusing (IEF), run as the first dimension of 2-D electrophoresis or as a separate application. IPG strips contain a preformed pH gradient immobilised in precast polyacrylamide gels on a plastic backing. A comprehensive range of overlapping IPG strips covering narrow, medium, and wide pH ranges are available in various strip lengths, and the strips are individually packaged and bar coded for convenient handling and sample tracking.