4127 Results for: "tert-Butyl+acetoacetate&view=easy"

Supplier: Sartorius Balances

The Cubis® II laboratory balances are modular, therefore they allow to choose between applications and configurations which suit the best to the needs. These balances can be configured at the level of display, draftshields, software applications and hardware functions.

Supplier: SEMPERIT TECHN PROD

These hand-specific disposable gloves with beaded cuffs feature a special inner coating. Ideal for use in laboratories, electronic and pharmaceutical industries.

Supplier: INTERSCIENCE

BagPage® single use bags with filter membrane reduce analysis time thanks to their wide opening and markings showing where to introduce the pipette. Ideal for pasty products, cheese, flour and cakes. To use: Place the sample in the opened compartment (Fig. 1). Mix and then add reagents into the specially designed compartment (Fig. 2).

Supplier: THERMO H + P LABORTECHNIK

Multi-position stirrers with direct control for up to 15 vessels, are ideal for general laboratory and mass screening applications. Units provide smooth stirring even at low speeds and are suitable for use with 15×250 ml beakers or 6×1 litre flasks.

Supplier: Testo

The 405 is a pocket anemometer with telescopic handle to facilitate the measurement of air flow, volume flow and temperature.

Supplier: B. Braun

These ambidextrous nitrile gloves are highly resistant against oil, lipids and a broad range of chemicals.

Supplier: Sartorius

The Microsart® RESEARCH Mycoplasma real-time PCR kit is especially designed for fast and reliable Mycoplasma contamination control in cell cultures, cell culture supernatants and media most applicable in research and development, e.g. biotech and biopharmaceutical research and development, universities and governmental research groups or for in-process control during biopharmaceutical production processes.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The color of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction color with a multi-stage color scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Atago

These salt meters utilise the electric conductivity method and require no reagent solutions. They feature a funnel-shaped sensor section which measures the salinity in a solution of soluble materials.

Supplier: Mettler - Toledo

Robust bench top meter for accurate pH determinations in the lab and near production.

Supplier: ROBU GLASFILTER

ROBU® washing bottle heads with VitraPOR® filter ensure precise gas dispersion in washing and absorption applications through integrated VitraPOR® filter discs.

Supplier: VWR Collection

Competitively priced electronic balances for the education sector. All models have a stainless steel top pan.

Supplier: Azbil Telstar Technologies

Aeolus H Serie is a high quality horizontal laminar flow workbench range for handling non-hazardous materials that require a particle free environment. These cabinets offer the highest product protection. Aeolus H horizontal laminar flow benches, have been specially designed to work in hospitals, pharmacies, IVF centres, food control, horticulture in vitro cultures, and also in electronics, optics, micromechanics, plastic Industries, etc. Horizontal laminar flow systems allow operation in sterile and particle free conditions thanks to the continuous flushing of the working area by means of a unidirectional horizontal ultra filtered air flow. The positive pressure inside the cabinet prevents inflow of ambient air from the surrounding environment into the work area.

Supplier: Thermo Orion

The Thermo Scientific™ Orion™ Pro Star PC215 pH/ion and conductivity bench meter is designed to provide accurate, reliable electrochemistry testing. Featuring an intuitive interface, enhanced data reporting and robust functionality, the Orion™ Pro Star PC215 meter delivers advanced performance in a modern and simplified package.

Supplier: Sartorius Balances

The Cubis® II laboratory balances are modular, therefore they allow to choose between applications and configurations which suit the best to the needs. These balances can be configured at the level of display, draftshields, software applications and hardware functions.

Supplier: Showa

These fully nitrile coated gloves are either available with cotton flock lining or without lining. They protect hands from oils, hydrocarbons, grease and abrasion, while providing an effective long lasting grip.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The color of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction color with a multi-stage color scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: THERMO MATRIX TECHNOLOGIES

A full-service, automated capping and decapping solution for Thermo Scientific™ Matrix™ and Nunc™ 48 and 96 tube racks.

Supplier: MAPA

Liquid-proof glove made of natural rubber latex. Curved fingers and contoured palm. Smooth chlorinated internal surface. Non-slip finish in hand area. Guaranteed silicone-free.

Supplier: Brady

Accessories for Brady Printer Models M511 and M211.

Supplier: Merck

Polysep™ II mixed media filters provide the high capacity of depth filters and the retention efficiency of a membrane in a single device. These versatile filters are ideal for removing particles from a broad range of challenging streams.

Supplier: VWR Collection

Experience the next level of high-performance liquid chromatography with the Chromaster Plus HPLC system. This latest version boasts a sleek new design and enhanced performance features, including the upgraded CM5310 column oven and CM5410 UV detector. The new design offers a modern and user-friendly interface, while the enhanced performance of the CM5310 column oven and CM5410 UV detector ensures superior results. Additionally, users can enjoy peace of mind with an extended warranty coverage.

Supplier: Sartorius Balances

The Cubis® II laboratory balances are modular, therefore they allow to choose between applications and configurations which suit the best to the needs. These balances can be configured at the level of display, draftshields, software applications and hardware functions.

Supplier: HUBER

Unistat® technology guarantees precise, reproducible temperature control results, short heating and cooling times and large temperature ranges without the need for fluid change. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats® are equipped with up-to-date pump technology for optimal heat transfer. The pump self-regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat® technology provides economic operation with reduced operating costs and efficient energy management. Unistats® are hydraulically sealed so the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapours and oxidation, saving resources.

Supplier: NEW PIG

Eight layers of 100% PP are thermally bonded to make PIG Mat exceptionally strong; won't rip, tear or fray even when saturated.

Supplier: 3M

For anodizing, composite bonding, and splicing, use 3M™ Polyester Tape 8403. This translucent green tinted tape is coated with a silicone adhesive that bonds well on difficult surfaces, including silicone-coated papers and films. It is chemical resistant and performs under a wide range of temperatures and environments. This tape is a thicker version of 3M™ polyester tape 8402.

Supplier: LA PHA PACK

Standard glass or plastic vials for GC and HPLC, micro-inserts, closures and kits. Can be used universally on almost all autosamplers, preferred type of vial for Waters and Agilent.

Supplier: KARTELL

Bed pan moulded in white PP.

Supplier: DuPont

These sleeves, model IC501BWH WS, are made of Tyvek®, which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability, and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash.

Supplier: DuPont

These overboots, model IC458BWH WS, are made of Tyvek®, which is composed of flash spun high density polyethylene, providing an ideal balance of protection, durability, and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash.