12631 Results for: "Dimethyl+ethylidenemalonate&view=easy"

Supplier: asecos

This fine dosing tap is made of zinc injection moulding.

Supplier: HyClone products (Cytiva)

HyClone™ PF-CHO LS and PF-CHO MPS media are designed to support the DHFR selection/amplification system. They have been successfully tested in a variety of cell culture systems, including T-flasks, spinner flasks, and bioreactors. PF-CHO MPS media is the powder version of PF-CHO LS media.

Supplier: Brady

Printable, paper labels for thermal transfer printers.

Supplier: Thermo Fisher Scientific

Copper ≥99.995% (metals basis), slug oxygen-free, Length: 6.35 mm (0.25 in), Ø 3.175 mm (0.125 in)

Supplier: VWR Collection

Accessory for UV/Visible spectrophotometers, Holder base for single cell holder and a selection of holders , For: U-5300

Supplier: MEMMERT

Accessories for Memmert UNpa ovens

Supplier: LABCONCO

Purifier®, 4' Telescoping base stand with leveling feet and non-welded shelf

Supplier: CONTEC

EasySat™ bucketless floor mop is an effective and quick solution to cleaning challenges.

Supplier: Dräger

This combined fire and industrial escape hood was developed with users, placing the focus on the fastest possible escape. Optimised operation and wearing comfort, a robust housing and a tested ABEK CO P3 filter ensure protection from toxic industrial and fire-related gases, vapours and particles for at least 15 minutes.

Supplier: Honeywell Chemicals

TraceSELECT™ Ultra and TraceSELECT

Supplier: Restek

Filter base plate, brass, 3-position , For: Gas filters, Super Clean®

Supplier: Thermo Fisher Scientific

Zirconium ≥99.9% (metals basis excluding Hf), slug (Hf ∼ 3%), Length: 3.175 mm (0.125 in), Ø 3.175 mm (0.125 in)

Supplier: Thermo Fisher Scientific

Zirconium ≥99.2% (metals basis excluding Hf), foil (max. 4.5% Hf), annealed, Thickness: 1.0 mm (0.039 in)

Supplier: Sartorius Balances

Individual E1 OIML class weights. Steel wire weights are available from 1 mg to 500 mg or highly polished, corrosion resistant steel knob weights are available from 1 g to 50 kg.

Supplier: CONTEC

Recycled 100% knitted polyester cleanroom wipes offer a sustainable solution for cleanroom environments, without jeopardising quality or performance. Soft textured wipes clean surfaces without scratching, while offering low levels of particles and fibres, abrasion and chemical resistance, and good solvent compatibility.

Supplier: Thermo Fisher Scientific

Calcium oxide ≥99.998% (metals basis) (excluding other alkaline earth and alkali metals 130 ppm max), Puratronic®

Supplier: CONTEC

This microfiber wipe is made of 100% polyester microfibre yarn knitted into a thermally bonded PP substrate.

Supplier: VWR Chemicals

For analytical gel separations of DNA/RNA below 1000 base pairs where a higher gel strength for ease of manipulation is required

Supplier: VWR Collection

Test weights in either stainless steel or aluminium.

Supplier: VWR Collection

These tips provides a solution for working with challenging strong polar solvents or highly electronegative reagents.

Supplier: Honeywell Chemicals

ACS GENERAL USE SOLVENTS

Supplier: PERSONNA MEDICAL

Safety dispenser fits 0,009 and 0,012" single edge blades.

Supplier: OMNIFIT

One piece PTFE with stainless steel casing ferrule for ¼.28 UNF nuts, PTFE

Supplier: SciLabware

This filteration system is used for microbiology and preparation of HPLC solvents. It is used with 47 mm Ø membranes.

Supplier: Honeywell Chemicals

Lithium sulphate monohydrate, dried ≥99.0% (dried basis, T), Puriss. p.a. ACS, Fluka™

Supplier: Thermo Fisher Scientific

Palladium silver alloy (75:25 w%) ≥99.9% (metals basis excluding Pt), foil, Thickness: 0.025 mm (0.001 in)

Supplier: Thermo Fisher Scientific

Palladium silver alloy (77:23 w%) ≥99.9% (metals basis excluding Pt), foil, Thickness: 0.025 mm (0.001 in)

Supplier: Thermo Fisher Scientific

Niobium ≥99.95% (metals basis excluding Ta), sputtering target, Ø 50.8 mm (2.0 in), Thickness: 3.18 mm (0.125 in)

Supplier: CONTEC

These heat seal wipes are made from filament polyester that is laser cut to bond the fibres at the edges of the wipes. This creates a very clean, non abrasive edge that allows full utilisation of the wipe surface. The wipes are saturated with 70% USP grade IPA, 30% DI water.

Supplier: Thermo Fisher Scientific

Zirconium ≥99.95% (metals basis excluding Hf), slug (Hf ∼ 3%), Length: 6.35 mm (0.25 in), Ø 6.35 mm (0.25 in)