306 Results for: "Carbolite"

Supplier: Carbolite

The AAF range of ashing furnaces are ideal for ashing materials such as food, plastics, coal and other hydrocarbons, in which high volumes of fumes are generated. Smoke and fumes are removed by a constant airflow (of between 4 and 5 volume changes per minute) created by convection between the air inlet and the tall chimney, however it is not too high to disturb samples in the crucibles, or chill them as the incoming air is preheated.

Supplier: Carbolite

Anti-radiation plugs, primary vacuum, max. 1200 °C, I.Ø 80 mm

Supplier: Carbolite

The CWF furnaces heating modules are situated on each side of the chamber and house a free radiating element, which offers 50% faster performance in comparison with traditional embedded element designs. Hard wearing materials are integral to the door surround and hearth, providing excellent resistance to everyday wear and tear, whilst secondary low thermal mass insulation ensures maximum thermal efficiency.

Supplier: Carbolite

The RHF range of furnaces are ideal for heat treatment applications, often associated with technical ceramics. This range of higher temperature laboratory furnaces feature silicon carbide heating elements located on either side of the chamber and hard wearing refractory brick around the door and hearth, which provides rapid heating and good resistance to abrasion. Safe operation is ensured by a double skin construction providing natural air convection for low outer case temperatures and power to the elements is isolated as soon as the door is opened.

Supplier: Carbolite

The modular horizontal tube furnace range GHA (single zone) and GHC (3-zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters.

Supplier: Carbolite

The HRF range of horizontal air recirculating chamber furnaces is available with a maximum operating temperature of 750 °C and is particularly suitable for stress relieving, tempering, normalising, annealing and other low temperature heat treatment processes.

Supplier: Carbolite

The vertical split tube furnace range VST (single zone) and TVS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility with the use of tube adapters the same furnace can be used with a variety of tube diameters. These furnaces comprise a furnace body which is hinged and split into two halves along its length. This makes exchange of work tubes easier and also enables the furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult. This design is particularly suitable for incorporation into extension test and creep test apparatus.

Supplier: Carbolite

Tube Furnace, PTC 12/20/150, Max. temp.: 1200 °C, Heated length: 150 mm, Ø int. tube: 20 mm, Power: Max. 1100 W, W×D×H ext.: 311×229×400 mm

Supplier: Carbolite

High Temperature Oven, HTCR 6/95, Capacity: 95 L, : N/A, Ext. W×D×H: 810×1010×960 mm, Int. W×D×H: 455×455×455 mm, Weight: 181,43 kg

Supplier: Carbolite

Ovens have a stainless steel inner chamber which is resistant to chemical attack and a corrosion resistant mild steel exterior, with a stoved epoxy/polyester coating that is easy to clean and scratch resistant. All units have multi position shelving for convenient loading/unloading. Low thermal mass insulation materials are used throughout in order to achieve rapid heating and to allow efficient energy utilisation. The high performance fan ensures optimum temperature uniformity throughout the work chamber.

Supplier: Carbolite

The ELF furnaces are ideal for light heat treatment applications and for educational purposes, they are not suitable for ashing or heavy industrial duties; please see details on the AAF and CWF ranges respectively. Digital PID temperature controller (type 301) ensures precise and repeatable temperatures with push button temperature setting, adjustable heating rate and a process timer.

Supplier: Carbolite

The Apex AX range of 250 °C laboratory ovens comprises three bench-top sized models equipped with the R38 digital PID temperature controller.

Supplier: Carbolite

These tube furnaces feature a resistance wire heating element wound around a ceramic worktube, forming an integral part of the heating element to ensure excellent thermal uniformity.

Supplier: Carbolite

Tray system, 136×223×16 mm, for AAF11/3

Supplier: Carbolite

The horizontal split tube furnace range HST (single zone) and HZS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters. These furnaces comprise a furnace body which is hinged and split into two halves along its length. This makes exchange of work tubes easier and also enables the tube furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult.

Supplier: Carbolite

The HTF range of furnaces are ideal for heat treatment applications, often associated with technical ceramics research and testing. This range of high temperature laboratory furnaces feature molybdenum disilicide heating elements mounted on each side of the chamber, which is built of high purity insulation capable of withstanding the high temperature cycles, typical in these applications.

Supplier: Carbolite

The RWF furnaces have free radiating wire-wound elements and highly efficient low thermal mass insulation, which combine to provide an ideal furnace for light to medium duty laboratory applications where rapid thermal response is vital.

Supplier: Carbolite

Over temperature protection control (OTC) unit for ELF furnace

Supplier: Carbolite

Specialist ashing furnaces offer superior containment of aggressive and corrosive vapours such as sulphuric, nitric and hydrochloric acids by keeping them away from the heating elements.

Supplier: Carbolite

Oven, PF 200, Capacity: 230 L, Convection type: Forced convection, Temperature range: Ambient +10…300 °C, Temperature fluctuation (time): ±0,2 °C (PID control), Temperature variation (spatial): ±5,0 °C @ 300 °C, Max. load per shelf: 10 kg, Shelves supplied (max.): 2 (15), Int. W×D×H: 592×520×750 mm, Ext. W×D×H: 965×720×920 mm, Weight: 75 kg

Supplier: Carbolite

High Temperature Oven, HT 6/95, Capacity: 94 L, : N/A, Ext. W×D×H: 810×1010×960 mm, Int. W×D×H: 455×455×455 mm, Weight: 181,43 kg

Supplier: Carbolite

These assay furnaces have a unique long-life construction specifically designed for the assay of precious metals.

Supplier: Carbolite

These controllers for programmable temperature can use up to eight segments, each segment comprising a ramp followed by a dwell. The dwell may be set to zero time.

Supplier: Carbolite

50MM CABLE PORT WITH COVER 1 * 1 items

Supplier: Carbolite

Wire-Wound Tube Furnace - Three Zone TZF 12/38/400, with Enhanced programmer 20 segments 3508P1, max. 1200C, max. power 1,3 kW 1 * 1 items

Supplier: Carbolite

SWITCH DOOR 1 * 1 items

Supplier: Carbolite

Mineral Insulated Heating Element for Carbolite Oven model LHT6/120 serial number 3/01/893 1 * 1 items

Supplier: Carbolite

FURNACE TUBE STF15/180 W CONTROLLER 3216 1 * 1 items

Supplier: Carbolite

IAP Tube 60 ID x 70 OD x 1200 Long 1 * 1 items

Supplier: Carbolite

SECURITY THERMOSTAT OTC-0 1 * 1 items