Supplier: Bohlender

These bearings have sealing rings to ensure a perfect seal. A special gasket made of PTFE and a FPM o-ring which is compressed by a GL screw cap ensure the stirrer shaft is sealed.

Supplier: Bohlender

GL 14 and GL 18 hose connectors made of PFA, GL 25 and GL 32 hose connectors made of PTFE with elastic sealing lip and FPM O-ring.

Supplier: Bohlender

Ideal for cutting plastic and rubber tubing with and without textile reinforcement.

Supplier: Bohlender

Protection sheets made from PTFE or FEP.

Supplier: Bohlender

For use as a table pad, slideway or for insulation.

Supplier: Bohlender

PP screw cap, green, distributor body and tubing connectors made from PP

Supplier: Bohlender

Boiling stones, made of PTFE, white, prevent chemical splashes and production of big bubbles when boiling the medium. Grain size: 4 mm. Packed in resealable bag. FDA conformity.

Supplier: Bohlender

GL 14 and GL 18 hose connectors, made of PFA, GL 25 and GL 32 hose connectors, made of PTFE, with elastic sealing lip and FPM O-ring and nut made of PPS.

Supplier: Bohlender

Silicone with PTFE washers.

Supplier: Bohlender

This vacuum adapter is made of PTFE with O-ring made of FKM for secure placement of standard filter cartridges made of glass or plastic on vessels and round flasks with ground joint.

Supplier: Bohlender

Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Supplier: Bohlender

These frits are made from PTFE.

Supplier: Bohlender

Connector, screw thread coupling, made of PTFE. Two screw caps made of PPS or PBTP with GL thread and a PTFE/FPM gasket. The product is only exposed to PTFE.

Supplier: Bohlender

Straight tube fitting, made of PTFE, with one screw-in thread (either NPT or G thread).

Supplier: Bohlender

PTFE, white.

Supplier: Bohlender

Made of PTFE.

Supplier: Bohlender

Block made of PTFE with one inlet and four outlets with female thread UNF ¼" 28 G.

Supplier: Bohlender

Transparent acrylic. Cabinets have a reinforced aluminium frame, door with foam rubber gasket and magnetic strip. Designed for storing or drying humidity sensitive products using silica gel. The controlled environment inside the desiccator is ideal for storing reference materials, retained samples, metallographic specimens, tobacco and DNA samples.

Supplier: Bohlender

Used for temperature measurement in aggressive liquids and ideal for built-in measurement cables.

Supplier: Bohlender

These filtering rods are made of microporous PTFE.

Supplier: Bohlender

Vario 2-part coupling to connect elastic tubing with non-elastic tubing made of PTFE, glass, metal or other plastics.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the fan shaped stirring unit completely made of PTFE.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: Bohlender

Stirrer blades made of PTFE, with one sided groove and 10 mm bore diameter.

Supplier: Bohlender

Body made of PTFE with 2 connections and nuts made of glass-fibre reinforced PTFE for connecting tubing or tube.

Supplier: Bohlender

Thermoelectric flanging tools are used for making flanges at the ends of plastic tubing such as PTFE, PFA and FEP tubings.

Supplier: Bohlender

PTFE coated stirring bars. Provide excellent centering and smooth stirring.

Supplier: Bohlender

Culture bottles, made of borosilicate glass, suitable for both low and high speed (maximum 1000 rpm) stirrers for gentle mixing of cell cultures.

Supplier: Bohlender

Body made of PTFE with two connections with female thread UNF 1/4" 28 G. Valve made of PPS with set screw and lock nut for adjusting and fixing pressure between 0,1 and 5 bar.

Supplier: Bohlender

Black screw cap, made of conductive PPS-EX, for GL 45 threaded bottles and distributor body made of conductive PTFE-EX.