7103 Results for: "Bismuth+tungsten+oxide&pageNo=42"

Supplier: Whatman products (Cytiva)

Nuclepore™ track-etched hydrophilic membrane filters offer a highly defined pore size cut-off in the submicron range, enabling particle deformity measurement and capture of extremely small particles. The membranes have sharply defined pores, high flow rates, and excellent chemical and thermal resistance. They are suitable for a variety of samples and applications, including microscopy, cytology, parasitology, and certain air and oceanography analyses.

Supplier: Thermo Fisher Scientific

Recommended for analytes with medium hydrophobicity or when a less hydrophobic phase is required to obtain optimum retention.

Supplier: ERGOMAT

The Ergomat Softline is made from nitrile rubber and is designed to increase comfort while reducing tripping hazards, body aches, quality issues, and sick leaves. It is designed for areas where resistance to oil, petrochemicals and heat is important. Ideal for wet environments, in case of excessive volumes of fluids, the Softline can be die-cut to allow for drainage.

Supplier: Bioss

Involved in self-renewal property of ES cells (By similarity). May be involved in transcriptional regulation.Tissue specificity： Expressed in kidney, epidermal keratinocytes, prostate epithelial cells, bronchial and small airway lung epithelial cells (at protein level). Expressed in malignant kidney and several carcinoma cell lines (at protein level). Expressed in embryonic stem cells, kidney, epidermal keratinocytes, prostate epithelial cells, bronchial and small airway lung epithelial cells. Expressed in embryonal carcinomas, seminomas, malignant kidney and several carcinoma cell lines.

Supplier: Brady

The B-494 polyester label is a reliable sample identification and traceability solution.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Save time and standardise activities in equipment preparation for steam sterilisation; or use in any pharmaceutical manufacturing setting to keep cleaned equipment protected from contamination.

Supplier: Ludwig Schneider GmbH & CO. KG

Red or blue filling. Coating: PTFE/FEP, transparent.

Supplier: ENTEGRIS

These point-of-use filters meet small to mid-volume photochemical filtration needs for positive developer and DI water applications. Both Optimizer® DEV filters (for developer applications) and Optimizer® DI filters (for DI water applications) require no pre-wetting, so the filters function immediately after installation. The design also limits the handling of hazardous chemicals during the installation and promotes a healthier workplace. Do not use either filter with aromatic hydrocarbons.

Supplier: VWR Chemicals

Avantor offers a comprehensive range of conductivity standards as Certified Reference Materials with the primary use calibrating of conductivity meters.

Supplier: MICROSOLV

Using proprietary bonding technology, the straight chain C18 hydrocarbon is bonded directly to the TYPE-C silica-hydride surface at two separate points of attachment with direct siliconcarbon bonds. This Si-C bond is virtually indestructible and confers great stability and longevity to these columns.

Supplier: EPPENDORF

The 5702 range of centrifuges is ideal for medical routine, clinical and biotechnology research.

Supplier: Thermo Fisher Scientific

Thermo Scientific™ screw cap microtube caps with O-ring are designed to create a secure seal with the Thermo Scientific™ microtube for sample preparation, transfer and storage applications. Tethered and non-tethered cap versions are available in a rainbow of colours.

Supplier: Bohlender

To prevent your waste canister from overflowing, connect these b.safe waste caps with electronic fill-level control to the alarm box. When the 'canister full' level is reached, you will receive an optical and acoustic warning. The alarm is triggered before your canister is completely full. This leaves a small safety buffer in the canister.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1422A autoclave bags with drawstrings can be used as either the inner, or outer bag for the steam sterilisation of pharmaceutical change parts.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Improve the performance, microbial barrier and cleanliness of your autoclave peel pouches.

Supplier: Avantor

These Avantor® ACE® CN columns provide great reproducibility and column lifetime.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Monomeric C18 bonding. Hydrophobic C18 phase suitable for analyses of a wide range of compounds, from acidic through slightly basic. Replaces Hypersil® BDS C18 and Pinnacle® ODS Amine.

Supplier: TOSOH Bioscience

SkillPak™ BIO pre-packed columns are designed for a fast method development and scale-up of multi-column chromatography (MCC) or continuous chromatography processes. They are pre-packed with TOYOPEARL® process chromatography media for bioseparations.

Supplier: ProSci Inc.

TRIM42 is a member of the tripartite motif (TRIM) family. The TRIM motif includes three zinc-binding domains, namely a RING, a B-box type 1 and a B-box type 2, and a coiled-coil region.This gene encodes a member of the tripartite motif (TRIM) family. The TRIM motif includes three zinc-binding domains, namely a RING, a B-box type 1 and a B-box type 2, and a coiled-coil region.

Supplier: MICROSOLV

Cogent Amide™ has an amide functional group bonded to the silica-hydride surface direct silicon-carbon bonds. Since the ligand is attached to the surface with direct silicon carbon bonds the bonded phase does not hydrolyze in acidic conditions. Also, it does not make a strong association with acetone.

Supplier: Restek

These MXT-5 columns are Siltek-treated stainless steel with low-polarity phase, crossbond diphenyl dimethyl polysiloxane stationary phase. All residual catalysts and low molecular weight fragments are removed from the MXT-5 polymer, providing a tight monomodal distribution and extremely low bleed.

Supplier: Avantor

Avantor® ACE® C4 columns provide great reproducibility and column lifetime. These stainless steel columns are available in a wide range of particle sizes and dimensions from capillary to preparative.

Supplier: Restek

Viva C8 columns are conventional monomeric octylsilane columns offering a shorter alkyl chain to provide less hydrophobic retention and improved basic peak shape over a traditional C18 phase. These general-purpose C8 columns are suitable for a wide range of compounds from acidic through slightly basic.

Supplier: Restek

These Viva columns are based on a wide pore material designed for optimal large-molecule separations. Base-deactivated spherical silica is useful for normal-phase or HILIC separations. These columns have a narrow distribution around the mean pore size, permitting a larger portion of the silica surface to play a role in the separation.

Supplier: Restek

Ultra C8 is a conventional monomeric octylsilane column offering a shorter alkyl chain to provide less hydrophobic retention and improved basic peak shape. It is made of high-purity, type-B silica that minimises activity and creates high-density bonding. These columns are designed for selective and reliable HPLC applications.

Supplier: Trajan Scientific and Medical

The SGE BPX5 GC Capillary Column provides a great low-polarity option for GC analyses. Recommended for: Ultra trace analyses, pesticides, herbicides, hydrocarbons, solvents, phenols, amines.

Supplier: Thermo Fisher Scientific

These ODS columns are suitable for non-polar and moderately polar analytes including acids, neutrals and lipophilic compounds. All column phases are endcapped.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Cyano bonding. Suitable for analyses of a wide range of compounds, from acidic through slightly basic. Also useful for confirmation of analyses on a C18 or C8 column. Can be used in normal phase or reversed phase mode of separation.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Monomeric C8 bonding. Similar to Pinnacle® DB C18, but the shorter alkyl chain provides less hydrophobic retention. Less retention can be useful for shortening analysis time, if resolution is adequate. Replaces Hypersil® BDS C8 and Pinnacle® C8 Amine.

Supplier: WTW

A wide choice of tests is available, for routine quantitative analysis in different applications, designed for use with WTW spectrophotometers and photometers. The test is automatically recognised by the laboratory instruments (via a barcoding system) and results are displayed in the appropriate units. Due to the different photometer optics, one test may yield different measuring ranges in different instruments; LED photometers may have smaller measuring ranges for the same test.