12705 Results for: "16-Hydroxypalmitic+acid&view=easy"

Supplier: Sartorius Balances

Individual E1 OIML class weights. Steel wire weights are available from 1 mg to 500 mg or highly polished, corrosion resistant steel knob weights are available from 1 g to 50 kg.

Supplier: CONTEC

Recycled 100% knitted polyester cleanroom wipes offer a sustainable solution for cleanroom environments, without jeopardising quality or performance. Soft textured wipes clean surfaces without scratching, while offering low levels of particles and fibres, abrasion and chemical resistance, and good solvent compatibility.

Supplier: Thermo Fisher Scientific

Calcium oxide ≥99.998% (metals basis) (excluding other alkaline earth and alkali metals 130 ppm max), Puratronic®

Supplier: CONTEC

This microfiber wipe is made of 100% polyester microfibre yarn knitted into a thermally bonded PP substrate.

Supplier: VWR Chemicals

For analytical gel separations of DNA/RNA below 1000 base pairs where a higher gel strength for ease of manipulation is required

Supplier: SciLabware

This filteration system is used for microbiology and preparation of HPLC solvents. It is used with 47 mm Ø membranes.

Supplier: Honeywell Chemicals

Lithium sulphate monohydrate, dried ≥99.0% (dried basis, T), Puriss. p.a. ACS, Fluka™

Supplier: Brady

Printable, paper labels for thermal transfer printers.

Supplier: Thermo Fisher Scientific

Chromium disilicide ≥99.5% (metals basis), sputtering target, Ø 76.2 mm (3.0 in), Thickness: 6.35 mm (0.250 in)

Supplier: Thermo Fisher Scientific

Titanium nitride ≥99.5% (metals basis), sputtering target, Ø 50.8 mm (2.0 in), Thickness: 3.18 mm (0.125 in)

Supplier: Thermo Fisher Scientific

Zirconium ≥99.2% (metals basis excluding Hf), wire (max. 4.5% Hf), annealed, Ø 0.5 mm (0.020 in)

Supplier: asecos

This fine dosing tap is made of zinc injection moulding.

Supplier: HyClone products (Cytiva)

HyClone™ PF-CHO LS and PF-CHO MPS media are designed to support the DHFR selection/amplification system. They have been successfully tested in a variety of cell culture systems, including T-flasks, spinner flasks, and bioreactors. PF-CHO MPS media is the powder version of PF-CHO LS media.

Supplier: Thermo Fisher Scientific

Copper ≥99.995% (metals basis), slug oxygen-free, Length: 6.35 mm (0.25 in), Ø 3.175 mm (0.125 in)

Supplier: Thermo Fisher Scientific

Stabilized

Supplier: TCI

N-Hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulphonate(sulphobetaine-16, SB-16) ≥98.0% (by total nitrogen basis) for biochemical research

Supplier: Thermo Fisher Scientific

6X DNA Loading Buffer is a pre-mixed solution used to prepare DNA markers and samples for loading on agarose or polyacrylamide gels.

Supplier: EP SCIENTIFIC

Cubitainers™ are designed for the efficient storage and transport. Recommended for collecting water samples and other low viscosity liquids to be analysed for inorganic trace analytes.

Supplier: BOCHEM

Cross type double bossheads, either made of stainless steel or malleable cast iron, chromium plated.

Supplier: Dräger

This combined fire and industrial escape hood was developed with users, placing the focus on the fastest possible escape. Optimised operation and wearing comfort, a robust housing and a tested ABEK CO P3 filter ensure protection from toxic industrial and fire-related gases, vapours and particles for at least 15 minutes.

Supplier: Honeywell Chemicals

TraceSELECT™ Ultra and TraceSELECT

Supplier: BIOLIFE ITALIANA

The producer operates in the in vitro diagnostic fields for microbiology, haematology, clinical chemistry, immunology and medical devices since 1947.

Supplier: TRISTEL SOLUTIONS

Medistel is used for chemical reprocessing of thermo-sensitive surgical instruments, flexible or rigid endoscopes and devices. It is suitable for both human and veterinary applications for disinfection of surgical instruments and medical devices. It is designed for open tank use and also suitable for other medical apparatus including ultrasonic baths.

Supplier: Honeywell Chemicals

ACS GENERAL USE SOLVENTS

Supplier: PERSONNA MEDICAL

Safety dispenser fits 0,009 and 0,012" single edge blades.

Supplier: OMNIFIT

One piece PTFE with stainless steel casing ferrule for ¼.28 UNF nuts, PTFE

Supplier: VWR Collection

PP, high grade gamma resistance, conical, with HDPE flat cap.

Supplier: VISION ENGINEERING

Accessory for microscopes, Long base for 3D stereo microscope DRV-Z1

Supplier: MBV

Case for DA100, For: MAS-100 NT®, MAS-100 NT Ex®

Supplier: VWR Collection

Test weights in either stainless steel or aluminium.