Multi-parameter meters, handheld, Portavo® 907

Supplier: KNICK

Certificates

Supplier: KNICK

About this item

These versatile, portable instruments can measure pH, ORP, conductivity and dissolved oxygen (optical). Thanks to their robustness and large selection of suitable sensors, they are suitable for both laboratory and process applications. Waterproof according to IP 66/IP 67.

Reinforced plastic enclosure for rough industrial applications
Integrated cover protects the display and serves as laboratory stand
High resolution colour TFT display is transreflective allowing the display to be read in bright sunlight
Data log function can store up to 10000 values
Digital Memosens® input, which allows signals to be digitised and transferred inductively i.e. via a non-contact connection
Integrated sensor quiver (protective container for sensor) prevents sensor dry-out and damage
Optical oxygen measurements possible
Automatic status check of the device and sensor; evaluation of the sensor data end calibration intervals
Memosens®: All information on sensor life are saved directly on the sensor (history of calibration, operation time, lifetime, sensor wear, SIP cycles…)

Portavo® 907 OXY Set includes the Portavo® 907 multi-parameter-meter and the digital probe SE 340 for optical oxygen measurements, with M12 8-pin plug according to DIN EN 50262.
Portavo® 907 LDO Set includes the Portavo® 907 multi-parameter-meter, the digital probe SE 340 for optical oxygen measurements, a carrying case and buffer solutions.
Portavo® 907 pH Set includes the Portavo® 907 multi-parameter-meter, the digital Memosens sensor SE 102 NMS, Memosens cable, carrying case and pH buffer solutions.
Portavo® 907 Multi Set includes the Portavo® 907 multi-parameter-meter, the digital Memosens pH sensor SE 102 NMS, Meosens conductivity sensor SE 615/1-MS, Memosens oxygen sensor SE 715/1-MS, Memosens cable, carrying case and pH buffer solutions.

Delivery: Supplied with manual, 4× AA batteries, carrying strap, factory certificate, micro USB port for PC connection, USB cable (1,5 m) and Paraly® 112 PC software. All instruments, except for the sets, are delivered without an electrode, which needs to be ordered separately.
Portavo® 907 LDO Set includes the Portavo® 907 multi-parameter meter, SE340-MS digital probe for optical oxygen measurements, a carrying case and buffer solutions.
Portavo® 907 pH Set includes the Portavo® 907 multi-parameter meter, Memosens SE102-MS digital pH sensor, Memosens cable CA/MS-001XFA-L, carrying case and pH buffer solutions.
Portavo® 907 Multi Set includes the Portavo® 907 multi-parameter meter, Memosens SE102-MS digital pH sensor, Memosens SE615/1-MS conductivity sensor, Memosens SE715/1-MS oxygen sensor, Memosens cable CA/MS-001XFA-L, carrying case and pH buffer solutions.

Specifications

Catalog No:
665-0361
665-0287
664-0138

Model:
Portavo® 907 COND
Portavo® 907 OXY

pH range:
−2...+16
−2...+16

pH accuracy:
<±0,01
<±0,01

mV range:
±2000
±2000

mV accuracy:
<0,1% of value +0,3
<0,1% of value +0,3

Conductivity range:
4 electrode: 0,1 μS...1000 mS (0,05...500 mS/cm with electrode SE 204)
2 electrode: 0,1 μS...200 mS (0,01...200 μS/cm with electrode SE 202)
Depending on Memosens electrode

Conductivity resolution:
0,001 μS/cm (c <0,05 cm^-1)
0,01 μS/cm (c = 0,05...0,2 cm^-1)
0,1 μS/cm (c = 0,2...0,8 cm^-1)
0,1 μS/cm (c >0,8 cm^-1)
0,001 μS/cm (c <0,05 cm^-1)
0,01 μS/cm (c = 0,05...0,2 cm^-1)
0,1 μS/cm (c = 0,2...0,8 cm^-1)
0,1 μS/cm (c >0,8 cm^-1)

Conductivity accuracy:
<0,5% of value +0,4 μS
Depending on Memosens electrode

Resistivity range:
00,00 - 99,99 MΩ cm
00,00 - 99,99 MΩ cm

Salinity range:
0,0 - 45,0 g/kg (0...+30 °C)
0,0 - 45,0 g/kg (0...+30 °C)

TDS range:
0 - 1999 mg/l (10...40 °C)
0 - 1999 mg/l (10...40 °C)

DO concentration:
0,00...0,99 / 1,00...20,00 mg/L
0,00...0,99 / 1,00...20,00 mg/L

DO saturation:
0,000...200,0 %
0,000...200,0 %

DO accuracy:
Depending on Memosens electrode
Depending on Memosens electrode

Temperature range:
NTC 30: −20...+120 °C
PT1000: −40...+250 °C
Memosens: −50...+250 °C
NTC 30: −20...+120 °C
PT1000: −40...+250 °C
Memosens: −50...+250 °C

Temperature accuracy:
<0,5 K
<0,5 K

Display:
LCD, coloured
LCD, coloured

Power supply:
4 alkaline AA batteries, Li-ion accumulator (loading via USB) available
4 alkaline AA batteries, Li-ion accumulator (loading via USB) available

Compliance:
IP 66/IP 67
IP 66/IP 67

Data logging capacity:
10000 values
10000 values

Connections:
1×multi contact for 2-/4-electrode sensors (analogue)
1×M8 socket, 4 pins, for Memosens lab cable
2×4 mm socket for separate temperature detector
1×M8 socket, 4 pins, for Memosens lab cable
1×M12 socket, 8 pins for Memosens and optical oxygen sensors
2×4 mm socket for separate temperature detector