You searched for: Environmental Test Kits

Supplier: Lovibond

Test kit, Copper/Zinc LR tablet, Range: 0,05 - 4 mg/l

Supplier: Thermo Orion

Two-step direct measurement of total alkalinity and pH using a pH electrode.

Supplier: Hanna

Test kit, Ammonia high range, Range: 0,0 - 50,0 mg/l

Supplier: LaMotte Chemicals

Kit is sufficient to perform up to fifty tests each for nitrogen, phosphorus, and potassium levels using non-hazardous TesTabs.

Supplier: Heyl GmbH & Co, Gebr.

Test kit, Water hardness reagent, Testomat®, 500 ml, Range: 4,48  -  44,8 mg/l CaCO₃

Supplier: Lovibond

Test kit, Sulphate tablet, Range: 5 - 100 mg/l SO₄, For unit: MD600, MD610, MultiDirect and Spectrodirect

Supplier: CHEMetrics

Ideal for low- to medium-range colorimetric analysis of water quality

Supplier: Lovibond

Test kit, PHMB photometer tablet, Range: 2 - 60 mg/l PHMB, For unit: MD600, MD610

Supplier: Lovibond

Indicator for pH range 5,2 to 6,8.

Supplier: Thermo Orion

Orion™ AQUAfast™ Auto-Test Ampoule Reagents can be used with the Orion™ AQUAfast™ AQ4000 colorimeter to simplify sample preparation and tests.

Supplier: Lovibond

Test kit, Hydrogen peroxide LR tablet, Range: 0,01 - 3 mg/l, For unit: MD600, MultiDirect and Spectrodirect

Supplier: NPS

Strips simultaneously test for acid/base, oxidiser, fluoride, petroleum product/organic solvent, and iodine/bromine/chlorine risks.

Supplier: CHEMetrics

Hydrogen Peroxide CHEMets® used to to monitor sterilisation solutions in the packaging and sanitising processes. Hydrogen peroxide is a strong oxidising agent used for treating of industrial effluents and domestic waste and serving as a disinfectant in aseptic packaging.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Palintest

Tablet Count kits provide a simple method of analysis for an important range of water parameters. The tests are particularly useful for the routine control of industrial waters such as boiler waters and cooling water systems, as well as swimming pools, natural waters and similar applications.

Supplier: Heyl GmbH & Co, Gebr.

Test kit for the determination of the water hardness in very soft or softened water samples via titration with a liquid titration agent and a pipette accurately calibrated in hardness units.

Supplier: Thermo Orion

Orion™ AQUAfast tablet reagents perform colorimetric measurements of common water parameters with convenient, rapidly dissolving tablets.

Supplier: CHEMetrics

Test kits for boiler waters and applications requiring trace levels of D.O.

Supplier: Heyl GmbH & Co, Gebr.

Visual colour test method using a comparator disc.

Supplier: Thermo Orion

Orion™ AQUAfast™ COD reagents in digestion tubes are designed for use with Orion™ AQUAfast™ colorimeters and Orion™ AquaMate Vis and UV-Vis spectrophotometers. Just add the sample to the COD digestion tube, digest sample in thermoreactor and measure.

Supplier: Palintest

Aluminium reacts with Eriochrome Cyanine R indicator in slightly acid solution to produce a pink-red coloured complex.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Thermo Orion

Orion™ AQUAfast Powder Pack reagents perform colorimetric measurements of common water parameters with powders that dissolve quickly and mix easily.

Supplier: EUTECH

Test kit, Free chlorine (DPD) reagent kit, For unit: C401

Supplier: CHEMetrics

Ideal for low- to medium-range colorimetric analysis of water quality

Supplier: MACHEREY-NAGEL

The DiaQuant® product line is specifically designed for the dialysis environment to test rinse and feed water, as well as sufficient potency levels of disinfectant when storing dialysis equipment. All tests are simple and fast without any mixing or mess. Proven technology makes testing reliable and accurate, thus providing a safe environment for patients.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Lovibond

Test kit, DPD Glycine tablet (for CI separation), Range: 0,01 - 0,2 mg/l ClO₂, For unit: MD100, MD600 MultiDirect and Spectrodirect

Supplier: Lovibond

Indicator for pH range 6,0 to 7,6.