You searched for: Fittings and Connectors

Supplier: Restek

Parker's fittings are ideal for installing new equipment, modifying existing instrumentation or replacing worn connections.

Supplier: VICI JOUR RESEARCH

Connectors for low pressure applications are machined from PEEK.

Supplier: Restek

Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass or 316 grade stainless steel.

Supplier: Restek

Swagelok®, Reducing union, 1/8 to 1/16", Brass

Supplier: Restek

Ferrules with graphite construction for use with packed columns.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: Restek

Internal adapter made of stainless steel gives minimum volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.

Supplier: Restek

This split or splitless inlet adaptor fitting is suitable for capillary columns with internal diameter 0,53 mm. Makes column installation easy due to the nut protruding farther from the insulated injection port chamber.

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing cross, stainless steel, 130 mm, DN 40/25, Stainless steel

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: Restek

Replacement long nut connects stainless steel tubing to a Rheodyne® 6-port valve or other Rheodyne® part.

Supplier: UPCHURCH SCIENTIFIC

PP or ETFE. Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec® peristaltic pumps. Due to the low melting point of PP, these adapters are not autoclavable, however, they can be sterilised via gamma radiation. The ETFE connectors have superiour solvent resistance and a higher temperature rating (80 °C).

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, 1592 Adapter, 1-16 female to 1-8 flat-bottom, female, 1 mm thru-hole, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® LiteTouch®, C-235, nut, stainless steel, 1/4-28 coned port, for 1/8" OD tubing, 4500 psi, Stainless steel

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Quick-connect coupling and plug connection, made of acetal (POM) for a complete connection.

Supplier: UPCHURCH SCIENTIFIC

Made of stainless steel or PEEK.

Supplier: VICI JOUR RESEARCH

Peek one-piece hex-head fittings, with their integrated ferrule, are easy to use with the valve-tool and the colour-it colour-coded finger-tight adapters. PEEK one-piece hex-head fittings are available in short and long versions.

Supplier: UPCHURCH SCIENTIFIC

Several nut lengths and head styles to fit into a variety of applications, designed to connect ¹/₁₆" OD tubing to 10-32 coned ports, hold up to 9000 psi (620 bar).

Supplier: Restek

Internal reducing union used to connect two sizes of tubing, using zero-dead-volume fittings on each end. Suitable for 1,6 to 3,2 mm OD tubing.

Supplier: Restek

The tee with inverted cup design offers complete sample vaporisation and open-top design makes it easy to pack with glass wool, keeping sample residue from contaminating the cup.

Supplier: UPCHURCH SCIENTIFIC

PEEK Zero Dead Volume unions: Zero Dead Volume (ZDV) unions come complete with two F-300 fingertight fittings for ¹/₁₆" Ext.Ø tubing and are pressure rated to 5000 psi (344 bar).

Supplier: VICI JOUR RESEARCH

VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Supplier: Restek

This MSD source nut is made from brass. The 1,2 mm nut bore permits easy removal of ferrules with a standard tapered needle file. The material prevent thread-stripping on the transfer line, the design enhances ease of threading onto the transfer line and improves overall lifetime.

Supplier: WATERS

Replacement frit assembly - 2 µm

Supplier: ELDON JAMES

These tees are made of Natural Kynar® material, which has a temperature range of −62 to +107 °C and a pressure of 260 psi at 21 °C

Supplier: WATSON MARLOW

Tube to tube connectors for semi-rigid tubing.

Supplier: Roth Carl

Tubing connectors made of PBT with EPDM flat seal. Ideal for fast, safe and leakproof connections of tubing to glass hose connectors and glass threads.

Supplier: DIFCO BD

BD Intramedic™, Connectors, tubing, Intramedic™ 18-gauge Luer-Stub adapter, Tubing int.Ø: 1,19 mm