You searched for: Peristaltic Pumps

Supplier: BEHR

Models PLP 66, PLP 330 and PLP 1000. These peristaltic pumps include a pump rotor, two compression and four guide rollers.

Supplier: WATSON MARLOW

401U/DM3 three channel pump accepts double segment manifold tubing for microlitre flows.

Supplier: WATSON MARLOW

Models 520U /R, 520S/R2 and 520 U/R2
Peristaltic pumps with manual or external control for flow rates between 4 µl and 3,5 L/min. For internal tubing diameters of 0,5 to 9,6 mm. The powerful, brushless DC motor produces minimum idle time and high dosage accuracy. All models have a control range of 2200:1. A wide variety of pump heads (max. 48 channels) can be used.

Supplier: WATSON MARLOW

The modular design allows for many combinations of peristaltic pump drive units with pump heads, thereby creating a solution to meet virtually every need. Up to six 313 or 314 pump heads (also mixed) can be connected to a single drive. A maximum of 10 channels can be mounted on the five channel 314MC and 318MC supplementary heads (can also be mixed). Precision DC motor, maintenance free, high quality actuating drive with exact speed setting. Compatible with SPS and other systems with digital, analogue and serial communication options. User friendly operation, clearly legible display and framed membrane keypad for delicate operation. Stable, chemical resistant housing with smooth, hygienically clean surfaces and modern, highly functional design.

Supplier: WATSON MARLOW

The modular design allows for many combinations of peristaltic pump drive units with pump heads, thereby creating a solution to meet virtually every need. Up to six 313 or 314 pump heads (also mixed) can be connected to a single drive. A maximum of 10 channels can be mounted on the five channel 314MC and 318MC supplementary heads (can also be mixed). Precision DC motor, maintenance free, high quality actuating drive with exact speed setting. Compatible with SPS and other systems with digital, analogue and serial communication options. User friendly operation, clearly legible display and framed membrane keypad for delicate operation. Stable, chemical resistant housing with smooth, hygienically clean surfaces and modern, highly functional design.

Supplier: WATSON MARLOW

The 520Di is designed with two functions in mind:as a stand-alone dispensing unit; and as a fully integrated part of a filling machine. The wide-ranging industrial logic I/O control options and serial communications offer the flexibility for the pump to be linked to other filling equipment via a PLC.

Supplier: WATSON MARLOW

Series 200, 205S/CA and 205U/CA ideal for scientific applications whenever high accuracy at low flow rates is required. Two pumps are available, the manual (205S/CA) and the manual/auto control (205U/CA). Both are fitted with tachometer-controlled servo-quality DC motors for precise speed control. Pump heads with 4 to 32 channels may be fitted to both pumps.

Supplier: WATSON MARLOW

205S/CA models with manual control and 205U/CA models with automatic/manual control:
These pumps are suitable for a very accurate pulse-free flow rate. The flow rate of each channel is controlled using an independent adjusting screw. Control is manual or automatic, as required. The 205CA pump head with its special cartridges and their spring stator is factory-set for standard applications. The lockable occlusion adjustment allows modification and optimisation of parameters as required. These settings are retained after pipe changes.

Supplier: WATSON MARLOW

405U/L and 405U/L2 models for higher flow rates
High precision tubing pumps with automatic and manual control for tubing with a wall thickness of 1,6 mm. The pumps are fitted with spring-mounted tube beds for increased tubing lifetime and flow accuracy at pressures up to two bar. Speed control ratio 10:1. Dual-channel pump head ('L2') or single-channel pump head ('L') for Y elements (max. internal tubing Ø 4,8 mm) with offset aluminium rotors with four stainless steel rollers. Control options: 4 to 20 mA or 0 to 10 V analogue signals, TTL signal (SPS) compatible, start/stop and rotation direction. Operating temperature: 5 to +40 °C Power input: 30 VA.

Supplier: WATSON MARLOW

Models 403U/VM2, 403U/VM3, 403U/VM4
Ideal for highly precise flow rates with multiple channels. With spring mounted tube beds with individual setting options. The rotors have stainless steel rollers. These enable low pulsation and reproducible flow rates. The fixed clamping blocks facilitate the laying and exchanging of the tubing. The pump heads are designed for the use of ready made tubes. Speed control ratio: 20:1. The 0,5 to 10 rpm drive produces very precise, low volume flow rates. The 2,5 to 50 rpm drive is suitable for larger flow volumes. Control options: analogue signals of 4 to 20 mA or 0 to 10 V, TTL signal (SPS compatible), start/stop and rotation direction. Operating temperature: 5 to +40 °C. Power input: 13 VA.

Supplier: WATSON MARLOW

The 120 pumps offer flexibility for low flow applications. Available with single or multi-channel pumpheads which can be used with a variety of tubing materials and sizes. The 120 will help to maximize yield in fermentation and cell culture applications, and is perfect for single-use systems. Ultra-compact and stackable for multiple feeds like pH control, anti-foam, nutrient and buffer addition, the 120 offers the ideal combination of size and technology to optimise your process. The new 120 pump is perfectly suited to single use systems where no contamination can be accepted. Error-free tube change takes only seconds, with tubing automatically clamped and tensioned to ensure repeatable performance.