You searched for: Pumps

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

Service kit for ME 4 NT/MZ 2 NT

Supplier: Heidolph Instruments GmbH & Co.KG

Complete sets including pump drive, pump head, and tubing. Ready to use.

Supplier: KARTELL

Vacuum pumps have built in vacuum release valve allows for quick and easy release of the vacuum without disconnecting the pump.

Supplier: MP Biomedicals

White hand pump suitable for 7X bottles.

Supplier: Heidolph Instruments GmbH & Co.KG

Models PD 5101 and PD 5106 for high requirements. Peristaltic pumps are ideal for transporting and metering aggressive, abrasive, or corrosive solutions, and also for sterile media under low pressure. The medium to be transported only comes into contact with the tube, so there is no contamination. Suitable for transporting high-viscosity media, up to 10,000 mPas. The pumps are self-priming, without seals or valves. Can be used in the food industry for filtering and separating, in water treatment, biotechnology, and for routine laboratory applications. Pumping under pressure and vacuum possible. Maintenance-free motors ensure long service life.

Supplier: DWK Life Sciences

Foot switch, For: Peristaltic pumps Omnispense® Plus and Unispense® µP

Supplier: Heidolph Instruments GmbH & Co.KG

Models PD 5001 and PD 5006 for standard applications. Peristaltic pumps are ideal for transporting and metering aggressive, abrasive, or corrosive solutions, and also for sterile media under low pressure. The medium to be transported only comes into contact with the tubing, so there can be no contamination. Suitable for transporting high-viscosity media up to 10000 mPas. The pumps are self-priming, with no seals or valves. They can be used in the food industry for filtering and separating, for water treatment, in biotechnology, and for routine laboratory applications. Pressure and vacuum displacement possible. Maintenance free motors ensure long service life.

Supplier: Heidolph Instruments GmbH & Co.KG

SP vario pump head cover

Supplier: Heidolph Instruments GmbH & Co.KG

Peristaltic pump heads SP standard 1,6 mm and SP standard 2,5 mm: For simple pumping tasks. Housing made from die-cast aluminium. Rollers made from stainless steel, roller bearings made from polyamide. Rotor equipped with 2 convex rollers; cell cultures will not be damaged. For tubing with wall thickness of 1,6 or 2,5 mm. Rated flow: 0,5 to 3644 ml/min (depending on the drive and tubing used).

Supplier: Bohlender

Sampling pump is made up of PP and PTFE.

Supplier: Cytiva (Formerly Pall Lab)

This combined vacuum pump and compressed air supply is guaranteed oil and dust-free and helps to keep the entire laboratory spotlessly clean.

Supplier: Heidolph Instruments GmbH & Co.KG

Models PD 5201 and PD 5206 for advanced requirements. Peristaltic pumps are ideal for transporting and metering aggressive, abrasive, or corrosive solutions, and also for sterile media under low pressure. The medium to be transported only comes into contact with the tubing, so there is no contamination. Suitable for transporting highly viscous media up to 10000 mPas. The pumps are self-priming without seals or valves. Can be used in the food industry for filtering and separating, for water treatment, in biotechnology and routine laboratory applications. Media can be transported under pressure and under vacuum. Maintenance-free motors ensure long service life. Quantities displaced by the pump heads are stored in the program depending on the individual tubes used, and are shown in the digital display. Software may be ordered separately as an accessory. The pump drive is microprocessor-controlled. Equipped with RS232 digital interface; speed, metered quantity, flow rate, pause, and tube dimension can be controlled. Digital display of speed (min⁻¹) and flow rate (ml/min). Digital display of displacement volume (ml) in the case of volume metering. Intermittent metering is available with adjustable pause times. A metered volume can also be specified in addition to the flow rate display. Extremely simple calibration of displacement volume (ml) and flow rate (ml/min).

Supplier: Bel-Art Products, a Part of SP

Fits directly to a standard drum bung or carboy. It is constructed entirely of rugged PE and it is resistance to strong acids, alkalis and many solvents. The pump will efficiently deliver against a 3,65 m head of water and empty a drum or carboy to inside 3 mm of the bottom.
PE, Poly-hand pump.

Supplier: Avantor Fluid Handling

Four-vane rotary design is almost maintenance free.

Supplier: Dr. Weigert

Drum Pump, Dispenser for 5 L, 10 L and 12 kg canisters (30 ml stroke)

Supplier: Heidolph Instruments GmbH & Co.KG

Packages for Hei-FLOW Value 01 Hei-FLOW Value 06 peristaltic pumps.

Supplier: Avantor Fluid Handling

Make the most of your Masterflex drives replacement parts and other accessories.

Supplier: Cole Parmer

Chemical compatibility ideal for rotary evaporator application.

Supplier: KARTELL

Dispensing pump is operated by a unique lever-action stroke and can handle the most viscous materials.

Supplier: Avantor Fluid Handling

Totally enclosed motors are ideal for dusty, dirty, or damp environments.

Supplier: Avantor Fluid Handling

Operate a 230-240 VAC motor with only a 115 VAC power supply.

Supplier: Avantor Fluid Handling

Create your own motor mounting with the hardware below.

Supplier: Avantor Fluid Handling

For Class 1 Group C and D, Class 2 Group F and G locations.

Supplier: Avantor Fluid Handling

Use with three-phase motors to create a variable-speed system.

Supplier: DWK Life Sciences

The WHEATON® OmniSpence® ELITE and UniSpense® PRO are intelligent peristaltic pumps for all dispensing needs. Whether the user is making sterile liquid transfers to and from containers or filling vials or titer plates these pumps will simplify and accelerate the laboratory throughput. It is ideal for any laboratory or clinical setting where accurate and precise liquid dispensing is important.

Supplier: Thermo Fisher Scientific

Attach the Nalgene™ aspirator vacuum pump directly to sink faucets for vacuum draw. It can draw 11,5 L air per minute at a water flow rate of 6,5 L per minute. It operates efficiently with water pressures as low as 7,5 psig for minimum water consumption and comes with an integral check valve and tubing for insertion in discharge end.

Supplier: Avantor Fluid Handling

Four-vane rotary design is almost maintenance free.

Supplier: Avantor Fluid Handling

Four-vane rotary design is almost maintenance free.

Supplier: Sartorius

The vacuum pump series Microsart® maxi.vac and Microsart® mini.vac provide up to date technology for daily use in the Microbiology laboratory environment.